How to Install a Sioux Chief Shower Drain
Embarking on a bathroom renovation or installation project? One key element that's often overlooked is the shower drain. Sioux Chief offers a range of reliable and durable shower drains perfect for your needs. Here's a comprehensive guide on how to install a Sioux Chief shower drain for a smooth and efficient process.
Before you begin, ensure you have the correct kit for your shower type. Sioux Chief provides kits for both traditional tile showers and their patented Zero-Drain linear shower system. Gather your tools - you'll need adjustable wrenches, a screwdriver, and maybe a hacksaw - and let's dive into the installation process.
Preparation and Measurement
Accurate measurement is crucial to ensure a seamless installation. Start by determining the drain location, typically the shower's lowest point. If you're replacing an existing drain, use it as a reference. For new installations, Sioux Chief recommends placing the drain edges around 1/4" to 1/2" from the walls.
Once you've determined the location, mark it precisely. For tile showers, mark the locations for the drain mounting holes on the shower pan. For Zero-Drain systems, mark the center point of the shower.
Preping the Drain Assembly
Sioux Chief drains come with a stainless steel strainer body, a coupling, a large screw trap, and appropriate mounting hardware. Begin by assembling the drain. Insert the coupling into the bottom of the strainer body, ensuring it's fully seated.
For tile showers, install the gasket onto the strainer body. For Zero-Drain systems, you'll attach the coupling to the stainless steel manifold. Tighten both using adjustable wrenches, ensuring you don't overtighten and damage the threads.
Installing the Drain Body
Start by placing the assembled drain body into the prepared shower pan or saturated bed of mortar for tile showers. For Zero-Drain systems, position the assembled drain onto the manifold, ensuring the center point aligns with your previous marking.
Secure the drain body using the provided hardware. For tile showers, use the screws to attach the strainer body to the shower pan. For Zero-Drain, use the provided screws to attach the coupling to the manifold.
Connecting to the Plumbing
Next, connect the drain to your shower's plumbing system. First, position the PVC or CPVC pipe behind the drain, aligning it with the drain coupling. If necessary, use a hacksaw to cut the pipe to the correct length.
Applyumpulan or PVC cement and primer to the pipe and the inside of the drain coupling. Insert the pipe into the coupling, twisting it slightly to ensure a strong bond. Allow the cement to cure for the recommended time before continuing.
Installing the Slope Kit (Tile Showers)
Sioux Chief tile drain kits include a slope kit to ensure proper water drainage. Start by laying the drain channel in the bottom of the shower. Position the channel so it slopes gently towards the drain.
Place the drain fitting into the channel, ensuring it's securely seated. Insert the drain fitting through the hole in the strainer body liner. Ensure the liner is smooth and free of any wrinkles or creases. Secure the liner using the provided screws.
Tilting and Grouting (Tile Showers)
After the pipe cement has cured, you can continue with tiling. Start by spreading thinset mortar over the shower floor, ensuring it's sloped towards the drain. Install the tile using the appropriate spacing.
Once the tile has set, grout the joints. Ensure the grout is properly cured before using the shower. For Sioux Chief's Zero-Drain system, the tiles can be installed directly onto the linear drain, following the same tiling and grouting process.
Congratulations! You've successfully installed your Sioux Chief shower drain. Regular maintenance, like cleaning the strainer and preventing clogs, will ensure its longevity. Always remember to use appropriate safety measures when working with plumbing and electrical systems.