how to install a cast iron toilet flange

How to Install a Cast Iron Toilet Flange: A Step-by-Step Guide

By Ashley Miller
AD

Installing a cast iron toilet flange might seem like a daunting task, but with the right tools and step-by-step guidance, you can securely and effectively complete this plumbing task. This guide will equip you with the knowledge and confidence needed to replace an old or damaged toilet flange with a new cast iron one. Let's dive in.

Before starting, ensure you have the required tools and materials: a new cast iron toilet flange, a hacksaw, a trowel, some flexible caulk or plumber's putty, and a mechanical Persian bend or a brass hammer for setting the bolts. Ensure your chosen cast iron toilet flange is evenly balanced and coordinating with your toilet size and shape.

Preparation and Removal of the Old Flange

Begin by shutting off the water supply to your toilet and flushing it to empty the tank and bowl. Disconnect the water supply line from the bottom of the tank. Place a bucket underneath to catch any remaining water.

AD
a man using a drill to fix a hole in the floor
a man using a drill to fix a hole in the floor
HOW TO REPAIR A CAST IRON TOILET FLANGE
HOW TO REPAIR A CAST IRON TOILET FLANGE
How to Repair a Cast-Iron Toilet Flange | Ask This Old House
How to Repair a Cast-Iron Toilet Flange | Ask This Old House

Next, disconnect the tank from the bowl by unscrewing the bolts using a screwdriver or adjustable wrench. If the bolts are rusted, you may need to use a hacksaw to cut through them near the nut, and then use pliers to pull out the cut pieces. Carefully lift the tank from the bowl and set it aside.

Removing the Old Flange

To remove the old flange, you'll need to cut through any caulk or mastic sealing the old flange to the floor. Then, use a hacksaw or utility knife to saw through the bolts at their midpoint. The old flange should now lift off easily once the bolts are cut through.

Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
there is a hole in the floor with a spatula next to it
there is a hole in the floor with a spatula next to it

Remove any remaining caulk or mastic from the floor to create a smooth surface for the new flange. Also, ensure that the drainpipe is clean and free from any debris.

Preparing the New Cast Iron Flange

Before installing the new cast iron toilet flange, ensure it's perfectly level and centered over the drain pipe. The new flange should sit flat on the floor and align with the top of the drain pipe. The bolts on the flange should align with the bolt holes on the toilet base.

AD

Once positioned correctly, trace around the new flange with a marker, ensuring the outline is centered and square. This will provide you with a guide for cutting the floor if necessary.

Installing the New Cast Iron Toilet Flange

Using a hacksaw or reciprocating saw, carefully follow your traced line, cutting through the floor if needed. The newly cut hole should be slightly smaller than the traced outline to allow room for the new flange.

Place the new cast iron toilet flange in position, ensuring it sits level and centered. Mark the hole locations of the bolts on the floor using a pencil. Drill pilot holes at these marked locations. The pilot holes should be slightly smaller than the bolts to ensure a tight fit.

AD

Securing the New Flange

Apply a generous amount of flexible caulk or plumber's putty around the underside of the new cast iron toilet flange. This will create a watertight seal and keep the flange firmly in place. Center the flange over the drain pipe, ensuring the bolts align with the pilot holes.

Place the toilet base over the bolts and gently lower it onto the new flange. Use a mechanical Persian bend or a brass hammer to set the bolts into the pilot holes securely. You may need to tap each bolt gently to ensure they're fully seated. Do not overtighten as this can strip the threads.

Reassembling the Toilet

Reassemble the toilet by placing the tank back onto the bowl and securing it with the bolts. Once the bolts are tightened, replace the water supply line and turn on the water supply. Flush the toilet to check for any leaks.

AD

Inspect your work thoroughly, both inside the bowl and around the base, to ensure there are no leaks. If everything is tight and secure, you've successfully installed your cast iron toilet flange! Regularly inspect your toilet and flange for any signs of wear or leaks to ensure continued proper functioning.

AD