how to force drain lg washer

Resolve LG Washer Clog: Step-by-Step Force Drain Tutorial

By James Thomas
AD

Ever found yourself towel-drying clothes after a washing cycle because your LG washer isn't draining properly? It's a frustrating situation, but don't fret; you're not alone, and more importantly, you can fix it. Follow our detailed guide to tackle this issue and get your LG washer draining efficiently once again.

Before diving into solutions, let's first understand why your LG washer might be failing to drain. Common culprits include lint buildup, blocked drain hoses or pumps, or even a faulty drain pump. Let's explore each possibility and its simple, DIY solution.

Inspecting and Cleaning the Drain Pump

Your LG washer's drain pump is responsible for pushing water out of the machine. If it's clogged or faulty, it won't drain water properly.

AD
LG Washer Leaking How to Fix a Drain Line
LG Washer Leaking How to Fix a Drain Line
LG Washer Won’t Drain / Keeps Draining - Ready To DIY
LG Washer Won’t Drain / Keeps Draining - Ready To DIY
Troubleshoot Fast Draining: 4 Possible Causes, Easy Fixes
Troubleshoot Fast Draining: 4 Possible Causes, Easy Fixes

Unplug the washer, locate the drain pump, and disconnect it from the power source. With the pump removed, you can visually inspect it for any clogs or damage. If it's clean, reunite it and proceed to the next step. If not, carefully clean it using a suitable brush and replace it only if it's still not working.

Checking and Clearing the Drain Hose

The drain hose is another critical component that requires periodic inspection. If it's kinked or blocked, water won't be able to flow out effectively.

🌎 LG WASHER WON’T DRAIN - OE ERROR - DIY and SAVE $$$ ✨
🌎 LG WASHER WON’T DRAIN - OE ERROR - DIY and SAVE $$$ ✨
the inside of a microwave door with an arrow pointing to the light on it's side
the inside of a microwave door with an arrow pointing to the light on it's side

First, locate the drain hose behind or beneath the washer. If it's twisted, unkink it. To check for blockage, disconnect the hose from the drain, and flush it with water to remove any debris. Also, ensure there's no air gap in the drain as it could hinder drainage.

Inspecting the Drain Pump Filter and Lint Trap

A clogged lint trap or filter can cause poor drainage. Both components, usually located at the bottom front of your LG washer, need to be cleaned regularly.

AD

Pull out the filter, clean it using warm water and mild detergent, then reassemble it. The lint trap, on the other hand, houses a sponge that might need replacing if it's repeatedly clogging the system.

Diagnosing and Fixing Electrical Issues

In some cases, the cause might not be physical but electrical. If you've checked all the mechanical components and they seem fine, the problem could lie within the internal electrical circuit.

Before attempting any electrical repairs, ensure you're comfortable with electrical work and have the right safety equipment. Check the following components: the drain pump motor, the flow sensor, and the main control board. If they're not functioning as expected, consider replacing them.

AD

Inspecting and Replacing the Flow Sensor

The flow sensor monitors water level in the washer. If it's faulty, it might not convey accurate information to the control board, potentially leading to drainage issues.

Access the sensor - usually located near the drain pump - and disconnect its wires. Use a multimeter to test its resistance. If it's faulty, replace it with a new one for optimal performance.

Checking and Replacing the Main Control Board

The main control board is the 'brain' of your LG washer. If it's malfunctioning, it might not communicate efficiently with other components, leading to drainage problems.

AD

Inspect the board for any visible damage like burn marks. If present, consider replacing the entire board. Always ensure you're using a genuine LG part for a perfect fit and optimal performance.

Proactive maintenance is key to preventing drainage issues. Regularly clean the filter and lint trap, and always ensure the drain hose is secured correctly. If trouble strikes, however, you now have the tools to tackle and conquer it like a pro. Happy DIY repairing!

AD