how to drain amana washer

How to Drain an Amana Washer: Step-by-Step Guide

By James Robinson
AD

Is your Amana washer not draining properly? This common issue can be quite frustrating, but don't worry, you're not alone. Many Amana washer users face this problem at one point or another. Thankfully, there are several troubleshooting steps you can take to resolve this issue. Let's dive in and explore how to drain an Amana washer efficiently.

Before you begin, ensure your washer is turned off and the power supply is disconnected to prevent any accidents. Also, make sure you have a screwdriver and possibly a vacuum cleaner on hand for a thorough cleaning.

Why Isn't My Amana Washer Draining?

Several factors could be causing your washer to not drain. Let's explore the most common culprits.

AD
Why is my washer not draining or spinning? 5 common causes and how to fix them — Homes & Gardens
Why is my washer not draining or spinning? 5 common causes and how to fix them — Homes & Gardens
How to Replace an Amana Washer Drain Pump. Reset Code #2 #amana #reset #drainpump #madamanadiy
How to Replace an Amana Washer Drain Pump. Reset Code #2 #amana #reset #drainpump #madamanadiy
Amana Washer Drains but Not Spinning/Agitating/Keeps Spinning - Ready To DIY
Amana Washer Drains but Not Spinning/Agitating/Keeps Spinning - Ready To DIY

1. **Clogged Drains**: A blockage could be preventing water from draining from the tub.

Washing Machine Hose

The hose connecting your washer to the drain could be kinked, stages, or clogged. Start by inspecting the hose for any noticeable issues, then try disconnecting it at the back of the washer. Check for proper water flow. If water flows freely, the problem might lie elsewhere. If not, clean or replace the hose.

How To Drain a Washing Machine (Front & Top-Loading)
How To Drain a Washing Machine (Front & Top-Loading)
How to Remove a Washing Machine Drain Hose Safely
How to Remove a Washing Machine Drain Hose Safely

If water doesn't flow freely through the hose, the next possible cause could be a clog in the drain pump. Learn how to diagnose and fix this issue in the following section.

Drain Pump

The drain pump in your Amana washer helps to pump out the water. If it's clogged or broken, it could prevent your washer from draining properly. To check the drain pump, follow these steps:

AD

First, disconnect the drain hose at the back of your washer. Next, locate the pump filter near the bottom front of your machine. Remove the filter and check for any signs of debris or clogs. If you find any, clean the filter thoroughly. If the pump itself is damaged, it may need replacing.

Additional Steps to Drain an Amana Washer

If you've tried the above steps and your Amana washer still isn't draining, don't give up just yet. There might be other underlying issues causing the problem.

1. **Sensor Problems**: The washer's float switch or water level sensor might be malfunctioning, preventing the machine from draining.

AD

Water Level Sensor

To test the water level sensor, disconnect it and then use a multimeter to check its continuity. If the sensor is faulty, replace it according to the manufacturer's instructions.

Float Switch

The float switch controls the water level in your washer. If it's stuck in the up position, it might be preventing your washer from draining. Inspect the switch and the float arm for any issues. If necessary, replace the switch.

After going through all these steps, your Amana washer should now be draining properly. Regular maintainance, like inspecting and cleaning the drain pump and hoses, can help prevent future drainage issues. Always remember to disconnect the power supply before performing any maintenance on your washer.

AD

It's essential to note that if you're unsure about any of these steps or feel uncomfortable performing them, don't hesitate to call a professional appliance repair technician. They have the tools and expertise to diagnose and fix any issues safely and efficiently.

AD