how to fix struts

How to Fix Struts: Expert Guide

By David Allen
AD

Got a bounce in your step replaced with a jiggle? That's when you realize your car's suspension might be in trouble. The struts, those key components of your vehicle's suspension system, could be the culprit. But don't worry, because unlike some suspension issues, fixing struts isn't as daunting as it sounds. Let's dive into a comprehensive guide on how to diagnose and fix struts, ensuring you're back on the road with a smooth ride in no time.

First things first, understanding struts. They control the motion of your wheels and absorb shock from bumps in the road. Struts are composed of a shock absorber and a coil spring, or a leaf spring, enclosed within a cylindrical shell. Now that you've got the basics let's get started on how to identify if your struts need repair or replacement.

Diagnosing Strut Issues

Before you reach for your toolbox, you'll want to identify the problem. Strut issues can manifest in various ways, so let's break down the common symptoms and how to check for them.

AD
Shocks And Struts Replacement Cost | Symptoms & Fixes
Shocks And Struts Replacement Cost | Symptoms & Fixes
How to Install Gas Struts for Cabinet Doors - Easy DIY Guide
How to Install Gas Struts for Cabinet Doors - Easy DIY Guide
the front and rear suspensions of a vehicle with parts labeled in english on it
the front and rear suspensions of a vehicle with parts labeled in english on it

1. **Bumpy Ride**: The most noticeable sign of bad struts is a bumpy or uneven ride. If your car feels like it's bouncing excessively after hitting a pothole or going over a speed bump, it might be time to check your struts.

Visual Inspection

Once you've noticed an issue, it's time for a visual inspection. Jack up the vehicle to have a clear view of the struts. Look for any leakages from the strut, which could indicate a blown shock absorber.

Learn the best way to replace a strut with and without spring compressors
Learn the best way to replace a strut with and without spring compressors
A Step-by-Step Guide on Struts Replacement
A Step-by-Step Guide on Struts Replacement

Check the condition of the strut shaft. If it's bent, crooked, or wobbles, it's a sign that the strut is worn out and needs replacement. Also, observe the strut mount on the vehicle's body. Check if it's broken or damaged, as this can also cause issues with the struts.

Bounce Test

There's a simple test you can perform to check the condition of your struts. Push down firmly on the vehicle's corner and release. A healthy strut should quickly return the vehicle to its original position. If the car bounces multiple times, it's a sure sign that the struts are worn out.

AD

Repeat this test for all four corners of your vehicle to ensure that only the damaged struts are replaced, saving you time and money.

Fixing or Replacing Struts

Once you've determined that your struts need to be replaced, it's time to roll up your sleeves and get to work. The process can vary slightly depending on your vehicle's make and model, but the following general steps should apply.

Before starting, ensure you have all the necessary tools and parts. You'll need a floor jack, jack stands, lug wrench, socket and ratchet, screwdriver, penetrant, and of course, the new struts.

AD

Jack Up the Vehicle

Using a floor jack, lift the vehicle off the ground and place jack stands under the frame or axle near the tires you'll be working on. Never rely solely on the jack to hold the vehicle; always use jack stands for safety.

Remove the lug nuts from the wheels and lower the vehicle until the tires are just off the ground. This gives you more room to work and makes the job easier.

Disconnect the Strut

The exact steps to disconnect the strut can vary depending on your vehicle. Commonly, the strut is connected to the frame or subframe, the control arm or lower control arm, and the strut tower. You'll likely need to remove components such as the anti-sway bar and the lower control arm to access and remove the strut.

AD

With the strut disconnected, carefully lower the vehicle to the ground and completely remove the wheel. Now you can remove the old strut and prepare to install the new one.

Install the New Strut

Position the new strut in place and begin to reconnect it to the vehicle. Ensure all bolts are tight and that the strut is properly seated in the strut tower. It's crucial to follow the specific torque specifications for your vehicle's make and model to ensure the struts are properly secured.

Once the strut is secured, reconnect the wheel and slowly lift the vehicle using the floor jack until the weight is off the jack stands. Remove the jack stands and lower the vehicle to the ground. Tighten the lug nuts and give the wheels a final torque.

Congratulations! You've successfully replaced your vehicle's struts. The final step is to take the vehicle for a test drive, ensuring it feels smooth and stable on the road.

Regular maintenance and inspection of your vehicle's struts can help prevent costly repairs and ensure a comfortable, safe ride. Don't wait until your car begins to feel bumpy - keep an eye on your suspension and perform regular checks to keep your vehicle in top condition. Happy wrenching!

AD