how to fix car cigarette lighter socket

How to Fix Car Cigarette Lighter Socket

By David Lewis
AD

Is your car's cigarette lighter socket refusing to light up? Don't let the inconvenience of a dead lighter ruin your driving experience or charge your devices. With a bit of patience and a few simple tools, you can fix your car's cigarette lighter socket yourself. Let's guide you through the process, step by step.

Before we dive into the nitty-gritty, let's understand why your cigarette lighter socket might not be working. The most common reasons are a tripped fuse, a blown fuse, or a problem with the cigarette lighter socket itself. We'll explore each of these issues and walk you through the solutions.

Checking and Replacing the Fuse

The first suspect in any electrical malfunction is usually a blown fuse. Your car's cigarette lighter shares a fuse with other electrical components, so it's worth checking if that's the issue.

AD
HOW TO REPLACE CAR CIGARETTE LIGHTER (12V) QUICK AND EASY IN ANY CAR 2018
HOW TO REPLACE CAR CIGARETTE LIGHTER (12V) QUICK AND EASY IN ANY CAR 2018
Car charger not working FIX Cigarette lighter socket repair auxiliary power outlet fuse replacement
Car charger not working FIX Cigarette lighter socket repair auxiliary power outlet fuse replacement
INSTALL: Cigarette Lighter Replacement | 2002-2007 Subaru Impreza, WRX, & STi
INSTALL: Cigarette Lighter Replacement | 2002-2007 Subaru Impreza, WRX, & STi

Here's how to check and replace the fuse:

How to Locate Your Car's Fuse Box

Most cars have their fuse box under the dashboard, often near the driver's side. Some may have it under the hood, consult your vehicle's owner's manual if you're unsure. Once you've located it, open the cover to access the fuses.

3 MORE things to check when your cigarette lighter socket stops working (car power outlet fix)
3 MORE things to check when your cigarette lighter socket stops working (car power outlet fix)

Pro tip: Make sure your vehicle is turned off and the ignition is in the 'off' position before you start the process.

Identifying and Replacing the Blown Fuse

Look for the fuse marked 'cigarette lighter' or have a circuit diagram, if available, to locate it. Fuse labels may vary, so some approximation might be needed. Once located, carefully pull it out with a fuse puller or small pliers to avoid damaging it.

AD

If the fuse looks alright, it's likely that the cigarette lighter socket itself is the culprit. If the fuse is blown, replace it with a fuse of the same amperage. You can find them at auto parts stores or online. If the new fuse blows immediately, something else might be wrong, such as a short circuit in the wiring.

Inspecting the Cigarette Lighter Socket

If the fuse isn't the problem, the cigarette lighter socket itself could be the culprit. Here's how to inspect and, if necessary, replace it.

You'll need a multimeter, a flathead screwdriver, and possibly a new cigarette lighter socket. The process might vary slightly depending on your vehicle, but here's a general guide:

AD

Removing the Cigarette Lighter Socket

Carefully pry off the socket's cover if it has one. Then, using a flathead screwdriver, gently push and twist the retention clip at the back of the socket to release it from the dashboard. Pull the socket out while holding the wires to avoid stressing them.

Pro tip: Take a picture of the socket and wires before removing it to help you remember how it goes back together.

Testing the Socket with a Multimeter

Set your multimeter to continuity mode. Carefully touch the meter's probes to the terminals on the bottom of the socket. If the socket is shorted or not functioning properly, the multimeter should either not beep or beep continuously. If the socket is good, you should hear a beep when you touch the probes to the appropriate terminals.

AD

If the socket is faulty, it's easier to replace it than to try to fix it. Replacement sockets can be found at auto parts stores or online.

Preventive Maintenance

Now that you've fixed your cigarette lighter socket, here are some tips to prevent future problems:

Don't leave cigarettes or other flammable items in the socket. Always remove them when not in use. Avoid overloading the socket with high-power devices, as this can cause damage and lead to the problems you've just encountered.

So, there you have it. With a bit of DIY know-how, you can fix your car's cigarette lighter socket and be back on the road in no time. Safe travels and happy fixing!

AD