how to fix a leaking moen shower faucet

Step-by-Step: How to Fix a Leaking Moen Shower Faucet

By Ashley Thomas
AD

A leaky shower faucet can be a frustrating and wasteful problem, not to mention the slippery floor and potential water damage it can cause. Moen is a reputable brand known for its durable and reliable faucets, but even these can develop leaks over time. If you're facing a leaky Moen shower faucet, don't despair. This guide will walk you through how to fix it, step by step, helping you save water and money.

Before we dive into the solutions, remember that it's crucial to turn off your water supply before performing any repairs. You can usually find the shutoff valves behind the shower wall or under the bathroom sink. Once you've turned off the water, open the faucet to relieve any remaining pressure. Now, let's get started!

Identifying the Type of Leak

Before you bust out your toolbox, try to pinpoint the exact source of the leak. The solution will vary depending on where the leak is occurring.

AD
Replace Shower Diverter in Leaky Tub Spout
Replace Shower Diverter in Leaky Tub Spout
HOW TO REPAIR REMOVE REPLACE A LEAKING MOEN SHOWER FAUCET CARTRIDGE VALVE with a SINGLE KNOB 1225
HOW TO REPAIR REMOVE REPLACE A LEAKING MOEN SHOWER FAUCET CARTRIDGE VALVE with a SINGLE KNOB 1225
How to repair a leaky single lever moen bath or shower faucet..Older style
How to repair a leaky single lever moen bath or shower faucet..Older style

1. **Handle or Spout Leak**: If the leak is happening around the handle or just below it, the issue is likely with the cartridge or ceramic disc. Moen uses both types in their faucets, and we'll address both in this guide.

2. **Base of the Faucet Leak**: If water is leaking from the base of the faucet, the problem might be a damaged o-ring, mineral deposits, or a broken pop-up drain assembly.

a person is washing their hands in a sink with soap and toothpaste on the faucet
a person is washing their hands in a sink with soap and toothpaste on the faucet
DIY Guide- Replace Your Shower Faucet
DIY Guide- Replace Your Shower Faucet

Moen Cartridge Faucets

First, let's address faucets with Moen's cartridge system.

**Symptoms of a faulty cartridge**: - Dripping water from the handle or spout. - Sudden change in water temperature. - difficile to turn the handle or mix the water temperature.

AD

**Step-by-step replacement**:

  1. Start by unscrewing the setscrew (if present) located underneath the handle using an Allen wrench. Some Moen faucets may not have this.
  2. Remove the handle by lifting it off the faucet body.
  3. Remove the cap that covers the faucet cartridge using a flathead screwdriver.
  4. Locate the retaining clip or nut that holds the cartridge in place. Use needle-nose pliers or an adjustable wrench to remove it, but be careful not to scratch the faucet.
  5. Remove the cartridge by pulling or twisting it gently. If it's stuck, use a rubber band to wedge between the cartridge and the faucet body to provide some leverage.
  6. Purchase a replacement cartridge ( Moen part #1222) that matches your faucet model. You can usually find this information on the faucet's trim or in the installation instructions that came with it.
  7. Insert the new cartridge and push it firmly into place. Replace the retaining clip or nut, ensuring it's securely fastened.
  8. Replace the cap and the handle, and reattach the setscrew (if present).
  9. Turn on the water supply and test your faucet.

If the leak persists or you've identified the issue as a base of the faucet leak, proceed to the next section.

Ceramic Disc Faucets

For ceramic disc faucets, the issue is usually a worn-out or broken disc. Follow these steps to replace it:

AD

**Step-by-step replacement**:

  1. Like before, start by shutting off the water supply and relieving the pressure from the system.
  2. Remove the handle and set it aside.
  3. Remove the escutcheon, which is the decorative cover around the faucet body.
  4. Locate the setscrew that holds the cam (the part that moves the disc) in place and remove it using an Allen wrench.
  5. Remove the cam and the ceramic disc (upper and lower) by gently prying them out. Be careful, as ceramic is brittle and can break easily.
  6. Purchase a new ceramic cartridge assembly (Moen part #1275) that matches your faucet model.
  7. Insert the new upper and lower discs into the faucet body. Note that the upper disc has a thin metal plate attached to it.
  8. Place the cam on top of the upper disc and replace the setscrew to secure it.
  9. Replace the escutcheon and the handle.
  10. Turn on the water supply and test your faucet.

Expert Tips to Prevent Future Leaks

While Moen faucets are designed to last, regular wear and tear can cause issues over time. There are a few things you can do to help extend the life of your faucet and prevent leaks:

1. **Regular Cleaning**: Hard water and mineral deposits can build up in your faucet and cause leaks. To prevent this, clean your faucet regularly with a mixture of vinegar and water, or a commercial descaler. Remember to rinse it off thoroughly afterwards.

AD

2. **Avoid Chemical Cleaners**: While it's important to keep your faucet clean, avoid using chemical cleaners on it, as they can damage the finish and seals.

3. **Professional Installation**: If you're not comfortable performing the repairs yourself, consider hiring a professional Plumber. A proper installation can help prevent leaks and other issues down the line.

4. **Regular Maintenance**: Check your faucet for any signs of leaks or other issues regularly. Addressing these early can help prevent bigger problems later.

There's nothing quite like the relief of a problem solved. By following these steps, you should be able to fix your leaky Moen shower faucet and get back to enjoying your shower without worry. Happy wrenching!

AD