Empty Keurig for Storage: Step-by-Step Guide
Are you planning to store your Keurig coffee maker for an extended period? It's essential to clean and empty it properly to prevent mold, mildew, or unpleasant odors from developing. Here's a step-by-step guide to help you empty and clean your Keurig for storage.
Before you begin, gather all necessary supplies, including mild dish soap, a clean cloth or sponge, and fresh water. Let's dive into the cleaning process.
Preparing Your Keurig for Cleaning
Before you start disassembling your Keurig, make sure it's unplugged and has cooled down to prevent any injuries. Next, remove the water reservoir and place it in the sink or a large bowl for easy cleaning.
For models with a 'Descale' or 'Clean' light, press and hold the lighted button for three seconds to initiate the cleaning process. This will allow any remaining water to drain from the machine. Proceed with the following steps to complete the cleaning process.
Cleaning the Water Reservoir
Remove the neck of the water reservoir and check for any scale or mineral buildup. If present, soak the neck in a solution of warm water and mild dish soap for 10-15 minutes. Gently scrub it with a soft brush or cloth, then rinse thoroughly and let it air dry.
Wash the entire water reservoir, including the lid, with warm water and mild dish soap. Scrub if necessary, then rinse and air dry. Ensure all parts are dry before reassembling and storing your Keurig.
Descaling the Internal Components
Brew a large cup of white vinegar and remove the k-cup or coffee grounds from the brewer. Slowly pour the vinegar into the machine's water reservoir, placing a large mug underneath the machine's dispensing area. Brew two cycles without pausing, then discard the vinegar-filled mugs.
Rinse the machine by brewing two cycles of fresh water, discarding each mug. Repeat this vinegar descaling and water rinsing process once more for optimal results. This method helps remove mineral buildup and improve your Keurig's overall performance.
Storing Your Keurig
Once your Keurig is clean and dry, reassemble the water reservoir and replace any removable parts. Clean the exterior of the machine using a damp cloth with mild soap, then wipe it dry. To prevent condensation, store your Keurig in an upright position with the drip tray and reservoir removed.
For further protection, place a small box or plastic bag over the machine's dispensing area and secure it with a rubber band. This will create a barrier against dust and other contaminants. Additionally, store your Keurig in a cool, dry place away from direct sunlight.
Preventing Future Odors and Mold
Before using your Keurig after storage, run a few cleaning cycles with water only to remove any residual vinegar taste. Regularly cleaning your machine between uses will help maintain its performance and prevent odors or mold from forming.
Maintain your Keurig by running a water-only cycle every two weeks, followed by descaling every three to six months, depending on your water quality. This routine care will extend the life of your coffee maker and keep your coffee tasting fresh.
Storing your Keurig properly involves thorough cleaning and drying to prevent mold, mildew, and unpleasant odors. By following these steps, you can ensure your coffee maker remains in good working condition when you're ready to brew your next cup of coffee. Happy storing!