how to drain samsung top load washer

Samsung Top Load Washer: How to Drain & Avoid Simmering Frustration

By Matthew Wilson
AD

If your Samsung top load washer is acting up, Theorie 1102 error messages apologize when you try to drain, or simply isn't draining properly, you're not alone. This issue can stem from various causes, but fear not! Draining your Samsung top load washer can be a straightforward process once you've identified the root cause. Let's dive in to troubleshoot and solve your washer drainage woes.

Before you start, ensure you have some basic tools ready: a screwdriver, a multimeter (optional), and perhaps a new drainage hose. Remember, if you're unsure about any of the steps, don't hesitate to reach out to a professional as playing with electrical parts can be dangerous.

Inspect the Drainage Hose

The drainage hose might be your culprit. If it's kinked, leaking, or clogged with lint or debris, it can prevent your washer from draining properly. It's an easy fix, so let's check it first.

AD
How to Fix Samsung Washer 5C & SC Codes: A Technician’s Guide 2026 - How To Fix It
How to Fix Samsung Washer 5C & SC Codes: A Technician’s Guide 2026 - How To Fix It
Samsung Top Load Washer Off Balance FIX DIY How to Replace Suspension Rods DC97-16350C
Samsung Top Load Washer Off Balance FIX DIY How to Replace Suspension Rods DC97-16350C
a person is opening the lid of a washing machine to remove it from its box
a person is opening the lid of a washing machine to remove it from its box

To access the hose, you might need to move your washer away from the wall. Once you've located it, follow these steps:

Check for Kinks or Leaks

Inspect the hose for any kinks or leaks. If you find any, straighten the kink or replace the hose if it's leaking.

Samsung top load washer dc error, unbalanced, fix
Samsung top load washer dc error, unbalanced, fix
Disassemble a Samsung top-load washer for cleaning in 3 minutes. An on point how-to video!
Disassemble a Samsung top-load washer for cleaning in 3 minutes. An on point how-to video!

Pro tip: While you're at it, check the connection points to ensure they're secure and not the source of any leaks.

Clear Any Clogs

If the hose appears intact but water is still not draining, it might be clogged. To confirm, try pushing water through the hose; if it's blocked, water won't flow, or it will barely trickle out.

AD

To clear clogs, you can try flushing the hose with hot water or use a wire or plumber's snake to remove any blockages. If the clog persists, it might be time to replace the hose.

Examine the Drain Pump

If the drainage hose checks out, the issue might lie with the drain pump. This component in your washer removes water during the draining phase. Let's explore two potential problems with the drain pump.

Check for Debris or Foreign Objects

The drain pump can accumulate debris, coins, or other small objects that can stop it from functioning properly. To inspect the pump, you'll need to access it from beneath your washer:

AD
  • Tip your washer onto its front panel.
  • Remove the access panel on the bottom of the machine.
  • Locate the drain pump and remove it, usually by unscrewing it or unclipping it.

Once you've accessed the pump, use pliers or needle-nose pliers to remove any obstructions. If the pump appears damaged, replacing it might be required.

Test the Drain Pump with a Multimeter

If there are no visible obstructions, you'll need to test the drain pump for continuity using a multimeter. Here's how:

  • Set your multimeter to the Rx1 (resistance) setting.
  • Touch one probe to each terminals on the pump.
  • Check the reading. If it's zero or close to it, your pump is likely functioning fine. If the reading is high and doesn't fluctuate when you turn on the washer, you might need to replace the pump.

Inspect the Drain Valve

The drain valve opens and closes to either allow water to enter or drain from the washer. If it's faulty or stuck, it can prevent your washer from draining properly.

AD

Much like inspecting the drain pump, you'll need to tip your washer onto its front panel to access the drain valve. Once you've located it, you can:

Test the Drain Valve Switch

Use your multimeter to test the drain valve switch for continuity, much like you would with the drain pump. If you find no continuity when the valve should be open (usually during the draining cycle), you might need to replace the valve.

Clean the Drain Valve

Sometimes, a simple cleaning can solve the issue. Disassemble the drain valve, clean the filter, and reassemble the components. If it starts working again, you're in luck! If not, it might be time to replace the valve.

Regular maintenance is key to preventing drainage issues. Clean your washer's filter regularly, ensure your machine is level to prevent hose kinks, and keep the area around your washer clear to facilitate proper airflow. If you've followed these steps and are still experiencing issues, it might be time to call a professional for further assistance.

AD