how to drain kenmore elite washer

How to Drain a Kenmore Elite Washer: Step-by-Step Guide

By Christopher Johnson
AD

Do you find that your Kenmore Elite washer is taking too long to drain or not draining at all? Draining issues can occur due to various reasons, from clogged drains to damaged pumps. This comprehensive guide will walk you through how to diagnose and fix these problems, ensuring your washer returns to its optimal performance.

Addressing draining issues promptly not only saves you the hassle of unfinished cycles but also prevents water damage to your washer and potentially your floor. Let's dive into the steps to drain your Kenmore Elite washer and troubleshoot common draining problems.

Understanding the Drain System

Before we delve into troubleshooting, it's crucial to understand your washer's drain system. Kenmore Elite washers use a pump to remove water from the washer tub once the wash cycle is complete. This pump is usually located at the bottom of the washer and connects to a drain hose that's routed to your home's plumbing system.

AD
Kenmore ELITE HE5T Washer User Manual : Kenmore : Free Download, Borrow, and Streaming : Internet Archive
Kenmore ELITE HE5T Washer User Manual : Kenmore : Free Download, Borrow, and Streaming : Internet Archive
Install Pump in Kenmore Elite Front Load Washer - OE Code
Install Pump in Kenmore Elite Front Load Washer - OE Code
Kenmore Washer Won’t Drain/Keeps Draining/Drain Cycle Problems - Ready To DIY
Kenmore Washer Won’t Drain/Keeps Draining/Drain Cycle Problems - Ready To DIY

Knowing this basic layout will help you better understand and address any issues that may arise with the draining process.

Locating and Accessing the Drain Pump

To access the drain pump, you'll need to perform some basic disassembly of your washer. First, unplug the washer from its power source. Then, locate the back access panel, usually at the bottom rear of the washer. Remove the screws securing this panel and gently pull it off.

Cleaning the drain basket on a Kenmore Elite HE3T
Cleaning the drain basket on a Kenmore Elite HE3T
Kenmore He2 washing machine washer drain problem fixed
Kenmore He2 washing machine washer drain problem fixed

Once the panel is removed, you'll see the drain pump. It's the large, circular component with a yellow drain hose connected to it. Before proceeding, ensure the washer tub is empty to prevent any water spills.

Checking and Clearing Clogs

One of the most common reasons for draining issues is a clogged drain pump or hose. To check for clogs, follow these steps:

AD
  • Remove the drain hose from the back of the washer.
  • Hold the hose upright and check for any blockages. You can use a flashlight to see inside the hose.
  • If there's a clog, you can attempt to remove it using a stiff wire or a plumbing snake. Be careful not to damage the hose during this process.
  • Once the hose is clear, reattach it and run a test cycle to see if the draining issue has been resolved.

Identifying and Fixing Electrical Issues

If you've checked and cleared the drain hose, and you're still experiencing draining problems, the issue may be electrical. The drain pump is activated by an electric motor, and if this motor is faulty or not receiving power, the pump won't work.

Before proceeding, ensure you have a multimeter to test for electrical continuity. Here's how to check the drain pump's motor:

Testing the Drain Pump Motor

Follow these steps to test the drain pump motor for continuity:

AD
  1. Disconnect the wires leading to the drain pump motor.
  2. Set your multimeter to the continuity setting (usually represented by a sound wave symbol or 'Ω').
  3. Touch the multimeter probes to the terminals at both ends of the motor.
  4. If the motor is functioning correctly, you should see a reading on the multimeter that indicates continuity (this could be a beeping sound or a reading of 'OL' or '∞').

If there's no continuity, the motor is likely faulty and needs replacement.

Testing the Drain Pump Solenoid

Another electrical component that can cause draining issues is the drain pump solenoid. This part controls the flow of water through the pump. To test the solenoid:

  1. Disconnect the wires leading to the solenoid.
  2. Use your multimeter to test for continuity by touching the probes to the terminals of the solenoid.
  3. If there's no continuity, the solenoid is likely faulty and needs replacement.

If you've identified a faulty motor or solenoid, you can purchase a replacement part and follow the manufacturer's instructions to install it.

AD

When in Doubt, Contact a Professional

While this guide covers many common issues that can cause draining problems in your Kenmore Elite washer, some problems may require the assistance of a professional. If you're unsure about any part of the troubleshooting process or you've tried the steps above with no success, it's always best to contact a certified appliance repair technician.

Regular maintenance and prompt problem-solving can extend the life of your Kenmore Elite washer and ensure it continues to perform efficiently. So, keep your washer in top shape by staying proactive and addressing any issues as soon as they arise.

Now that you know how to drain your Kenmore Elite washer and troubleshoot common draining problems, you're well-equipped to handle any draining issues that may arise. Happy repairing!

AD