How to Drain a GE Washer
Discovering a sodden or leaky situation around your GE washer? It's likely time to drain the water. While GE washers are designed to pump out water automatically, occasional manual draining might be necessary. Here's a step-by-step guide, followed by troubleshooting tips to get your GE washer running smoothly again.
Before we proceed, ensure you've got a few minutes and some tools at hand. You'll need a flathead screwdriver, a can of compressed air (optional), and maybe a wrench, depending on the make of your washer. Let's dive in!
Preparing Your GE Washer for Manual Drainage
First, let's ensure your washer is ready for manual draining. It's best to do this on an empty machine, so cancel any cycles running and remove any laundry.
Next, locate your washer's drain hose. It's usually beneath the washer or at the back. It's connecting the washer to the drain outlet. Ensure it's securely attached and hasn't slipped off. If it has, reattach it.
Draining the Washer Manually
Now, let's proceed to manually draining your GE washer. Immediately below the washer's front, you'll see a drain pump filter. Using your flathead screwdriver, remove the screws securing the filter. Lift the filter and its cover, and you'll see the drain pump.
Manually operating the drain pump is the next step. At the back or bottom of the pump, you'll find a small hole. Insert your flathead screwdriver into this hole and turn it clockwise. You should hear water pumping out. Keep turning until you hear air being pumped out – this indicates you've emptied the water.
Cleaning the Drain Pump Filter
While you're at it, clean the drain pump filter to prevent future draining issues. Soak the filter in hot water and a mild detergent or vinegar, then scrub it clean. Inspect the filter for any damages; if broken, replace it.
Once cleaned, reassemble and secure the filter back into place. Ensure all parts are well-aligned and secure.
Troubleshooting Common Drainage Issues
If you're experiencing trouble draining your GE washer manually, don't fret. We've got troubleshooting tips that might help.
First, check if your washer's drain hose is kinked or clogged. If so, straighten it out and clear the clog. If the hose is damaged, replace it.
Checking for Air in the Drain Line
If your washer won't fill properly during a cycle, there might be air in the drain line. To check, start a cycle, then release the air by opening a hot or cold water faucet. If you hear air hissing, turn off the water and cycle, then try again.
If the problem persists, you might need to check your washer's exhaust pump and air bubble tray. If you're uncertain about any part of this process, don't hesitate to contact a professional for assistance.
Resolving Leaking Issues
A leaky washer can be an indication of a failing drain pump or a clogged or kinked drain hose. Inspect these components, unclog or straighten the hose, and replace the drain pump if necessary.
Remember, preventative maintenance is key. Regularly clean your drain pump and hose to avoid future drainage issues.
That's it! Your GE washer should now be draining smoothly. If you've got further questions or need another perspective, feel free to share your experiences or ask for more advice. Happy washing!