how to disassemble kwikset lock

Step-by-Step Guide: How to Disassemble a Kwikset Lock

By David Moore
AD

Tired of fumbling with your Kwikset lock? Don't let a faulty lock cause you unnecessary stress. Learn how to disassemble a Kwikset lock with our step-by-step guide. No need to call a professional when you can do it yourself with these simple steps. Let's get started!

Before you begin, gather your tools: a flathead screwdriver, a pencil, and a small hammer. Make sure to work in a well-lit area and have some patience. Kwikset locks are intricate, but with a little persistence, you'll have it disassembled in no time. Remember, the process is the same for both right and left-handed locks.

Preparation and Initial Disassembly

Start by removing the screw covers from the lock. On Kwikset locks, these are held in place by small spring-loaded tabs. Use your flathead screwdriver to gently push in the tabs and slide out the covers. Be careful not to damage them, you'll need them for reassembly.

AD
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
Kwikset Deadbolt and Door Knob Lock Smartkey Installation (How To Install Fast and Easy)
260K views · 10K reactions | How To Re-Key Kwikset Smart Key Door Knobs! #diy @kwikset | The Excellent Laborer
260K views · 10K reactions | How To Re-Key Kwikset Smart Key Door Knobs! #diy @kwikset | The Excellent Laborer

Next, remove the Rosette. This is the decorative cap on the inner side of the lock. Use your screwdriver to pry it off. It might take a bit of force, so be prepared.

Removing the Lock Cylinder

Now, let's remove the lock cylinder. First, inserting your screwdriver into the slot on the back of the lock, press it lightly to release the cylinder from the retainer clip. You should see the cylinder pop out a little.

How to Take a Kwikset Lock Apart
How to Take a Kwikset Lock Apart
How to remove the lock cylinder from a Kwikset SmartKey entry knob
How to remove the lock cylinder from a Kwikset SmartKey entry knob

Remove the retaining clip. Using a small flathead screwdriver, gently pry the clip away from the cylinder, then slide it out. Now, you should be able to pull the lock cylinder out of the housing.

Separating the Lock cylinder Components

You've got the lock cylinder out, but it's not done yet. Kwikset cylinders are made up of several parts. Let's separate them. First, use your pencil to mark the position of the retaining ring. This will help you align the parts when reassembling.

AD

Use your small hammer to gently tap the cylinder to force the retaining ring out. You might need to use a bit of force, but don't overdo it. Once the ring is off, carefully separate the outer shell from the inner mechanism. Place the parts safely aside; you'll need them later.

Inspecting and Reassembling Your Kwikset Lock

Now that your lock is completely disassembled, take a moment to inspect the parts. Ensure there's no visible damage. If everything looks good, it's time to reassemble.

Start by reinserting the inner mechanism back into the outer shell. Align the parts with the marks you made earlier. Push them together firmly, but not too much. You don't want to damage the mechanism.

AD

Reinstalling the Cylinder

Insert the cylinder into the housing, matching the retaining clip's original position. Use your finger to press down the retainer clip. Make sure it's securely fastened.

With the cylinder back in place, press the lock cylinder back into the housing. It should snap back into place with a satisfying 'click'. Ensure the cylinder doesn't wobble. If it does, you might need to adjust the clip or the cylinder.

Reinstalling the Rosette and Screw Covers

Now, snap the Rosette back onto the inner side of the lock. Again, it might take some force, but it should go back on smoothly.

AD

Finally, slide the screw covers back onto the lock. Use your finger to push the spring-loaded tabs back into place, securing the covers.

The disassembly and reassembly of your Kwikset lock is now complete! You've kept your skills sharp and saved yourself the trouble of calling a locksmith. Just remember, lock maintenance is key to keeping your home secure. Happy DIYing!

AD