how to disassemble airpods case

How to Disassemble AirPods Case: A Step-by-Step Guide

By Steven Jones
AD

Ever wondered how the sleek, white AirPods case holds its charm even after countless charging cycles? Prying into its construction can be fascinating and also helpful if you're facing issues with its inner workings. Here's a step-by-step guide on how to disassemble an AirPods case, but remember, this voids your warranty, so tread carefully.

Before you start, gather your tools. You'll need a suction cup, an iOpener or heat gun, a spudger, and a pair of tweezers. This guide assumes you're working with an AirPods Charging Case from the second generation or newer, as the initial model has a slightly different design.

Preparation

First, ensure your AirPods are charged and removed from the case. If your case is stuck shut, it's best to heat the side that's stuck and use a suction cup to gently pry it open.

AD
How to Take Off your AirPods Case Safely!
How to Take Off your AirPods Case Safely!
WORLD’S FIRST USB-C AIRPODS PRO COMES WITH A SUSTAINABLE, REPAIRABLE CASE.
WORLD’S FIRST USB-C AIRPODS PRO COMES WITH A SUSTAINABLE, REPAIRABLE CASE.
How to Fix AirPods Case Not Charging? [11 Simple Solutions]
How to Fix AirPods Case Not Charging? [11 Simple Solutions]

Next, you'll need to soften the adhesives holding the case together. Use your iOpener or heat gun to apply gentle heat to the seam. Be patient, as overheat can damage the case and the internal components.

Opening the Case

With the adhesives softened, carefully slide your spudger into the seam, wiggling it to break the adhesive seal. Work your way around the entire perimeter. You should hear a popping sound as the seals break.

DIY airpods case made with hot glue ✨#diy #handmade #shorts
DIY airpods case made with hot glue ✨#diy #handmade #shorts
How to Sew a Keychain AirPod or Pixel Bud Carrying Case – Free PDF Pattern & Tutorial
How to Sew a Keychain AirPod or Pixel Bud Carrying Case – Free PDF Pattern & Tutorial

Once you've broken the seals, use your tweezers to pull the top half of the case away from the bottom. Be careful as you lift, as the two halves are still connected by the Lightning cable.

Disconnecting the Lightning Connector

The Lightning connector is secured with a clip. To disconnect it, carefully lift the connector using your spudger. The clip should pop out, allowing you to pull the connector free.

AD

Now, carefully separate the top and bottom halves of the case. Keep track of the position of the battery and the speaker, as they will need to be re-aligned when you reassemble the case.

Exploring the Internals

With the case open, you'll see the internal components: the battery, the charging coil, the speaker, and the circuitry board. The battery is secured with adhesive, so avoid prying it loose unless necessary.

The charging coil and the speaker can be gently pried loose using your spudger. Be cautious not to damage the delicate components.

AD

Understanding the Circuitry

You'll find the circuitry board secured to the case using screws. Remove these screws and gently lift the board. You'll see the LED, the charging inductance, and the antenna coil.

The LED is connected to the case's lid switch, which detects when the case is opened or closed. The charging inductance works with the battery to regulate the charging current. The antenna coil is used for Bluetooth connectivity.

Examining the Lid Switch

The lid switch is a critical part of the AirPods experience, as it tells your iPhone when to play audio. Disconnect the switch from the circuitry board for a closer look. You'll notice it has three points: one for the battery, one for the LED, and one that completes the circuit when the case is shut.

AD

When you close the case, the spring on the lid switch is compressed, completing the circuit and allowing your iPhone to pause audio playback. When you open the case, the spring decompression breaks the circuit, and your iPhone resumes playback.

With your AirPods case fully disassembled, you can now inspect its components, clean any debris, or even attempt to repair any issues. Remember, though, that this guide, while informative, is not official Apple support, and any damage caused by following these steps is your responsibility. Happy tinkering!

AD