How to Disassemble a Remington 870 Shotgun
Disassembling a Remington 870 shotgun is a straightforward process, essential for cleaning, maintenance, or minor repairs. With the right tools and the following steps, you can comfortably take apart your Remington 870 in about 10-15 minutes.
The Remington 870 is renowned for its reliability and durability, making it the most popular pump-action shotgun in the U.S. This comprehensive guide will walk you through the process, ensuring safety and thoroughness.
Understanding the Remington 870 Components
Before disassembly, familiarize yourself with the Remington 870's key components: the receiver, barrel, magazine tube, forearm, and pistol grip. Understanding these parts will make the disassembly process smoother.
Gather your tools: You'll need a flathead screwdriver, a punch or a small hammer, and a cleaning kit suited for your shotgun's caliber.
Initial Disassembly Steps
Start by ensuring your shotgun is unloaded and the action is open. Inspect the chamber visually and physically to confirm no ammunition remains.
Remove the magazine cap by turning it counterclockwise and pulling it off. Then, remove the follower and spring from the magazine tube.
Removing the Barrel and Forearm
Loosen the barrel nut using the flathead screwdriver. Position the tip of the screwdriver in one of the nut's slots and turn it counterclockwise.
Once loosened, use the punch or hammer to gently tap the nut counterclockwise until it's completely loose. Now, you can pull the barrel and forearm assembly off the magazine tube.
Disassembling the Receiver Group
The receiver group consists of the receiver, bolt, bolt handle, trigger group, and safety selector.
Start by removing the bolt handle by pressing the detent pin from the left side of the receiver and pulling the bolt handle out.
Removing the Bolt
Use a punch or hammer to gently tap the bolt release pin on the underside of the receiver. This pin retains the bolt in the receiver.
Once tapped, pull out the pin, and you should be able to lift the bolt out of the receiver.
Removing the Trigger Group
Remove the trigger guard and trigger by slipping them off the receiver. Locate the trigger pivot pin and push it out using a punch or a small drift.
With the pin removed, lift the trigger group out of the receiver. Depress the trigger to release any internal lever tension.
Regularly disassembling and maintaining your Remington 870 shotgun ensures it remains reliable and in good working condition. If you're unsure about any step or need further assistance, consult a professional gunsmith. Happy disassembling, and always remember to prioritiesafety when handling firearms.