how to disassemble a henry lever action rifle

Step-by-Step: How to Disassemble a Henry Lever Action Rifle

By Emily Johnson
AD

Are you the proud owner of a Henry Lever Action Rifle and wonder how to disassemble it for cleaning or maintenance? You're in the right place. This guide will walk you through the process step-by-step, ensuring your rifle is in top condition. Remember, safety first. Always unload and check your rifle is clear before starting. Let's dive in.

Henry rifles are renowned for their quality and reliability, but like any firearm, regular maintenance is key to keeping it that way. Disassembling your rifle allows you to clean it thoroughly, ensuring longevity and optimal performance. Let's get started.

Understanding the Henry Lever Action Rifle

Before disassembling, knowing your rifle's parts is crucial. The Henry Lever Action Rifle has the following primary components: the barrel, action (including the lever and trigger mechanism), stock, and magazine tube. Familiarizing yourself with these parts will make the disassembly process smoother.

AD
How does a rifle works | henry lever action rifle 😎🤘🏻 #leveraction #masonggun #winchester #henry
How does a rifle works | henry lever action rifle 😎🤘🏻 #leveraction #masonggun #winchester #henry
Henry AR-7: full disassembly & assembly | World of Guns
Henry AR-7: full disassembly & assembly | World of Guns
3D Animation: How the Famous Henry Lever Action Rifle in .22lr Works
3D Animation: How the Famous Henry Lever Action Rifle in .22lr Works

Now, let's look at the two main sections of the process: field stripping and action disassembly.

Field Stripping

Field stripping is the first stage of disassembly, involving separating the barreled action from the stock. Here's how:

someone is holding a metal object in their hands
someone is holding a metal object in their hands
I HATE How Much I love This - Henry Lever Action Supreme
I HATE How Much I love This - Henry Lever Action Supreme

1. **Turn the safety on** to prevent accidental discharges. Ensure the rifle is unloaded and clear.

2. ** Pull the lever** to open the action and eject any rounds from the chamber and magazine.

AD

3. **Push the trigger** to disengage the lever sear. This will allow the lever to close even with an empty chamber.

4. **Remove the stockscrew** located at the end of the magazine tube. This will allow the stock to slide off the barreled action. You can use a coin or a stock screws tool for this.

5. **Slide the stock** off the barreled action. The barrel and action should now be free from the stock.

AD

Action Disassembly

After field stripping, it's time to disassemble the action. This process involves removing the lever and sear mechanism. Here's how:

1. **Position the action** so that the ejector is facing you, with the lever in the down position.

2. **Remove the trigger pin**. This pin retains the trigger and trigger guard assembly. Once the pin is removed, the trigger and trigger guard can be removed as a unit.

AD

3. **Remove the hammer** by retracting the hammer spur and pulling it out of the action.

4. **Remove the lever and sear**. The lever and sear are held in place by a roll pin. Tap the pin out using a hammer and punch. The lever and sear can then be removed as a unit. Be careful not to lose the small spring that is part of this assembly.

Congratulations, you've successfully disassembled your Henry Lever Action Rifle for cleaning and maintenance!

Reassembling Your Rifle

Now that you've disassembled your rifle, it's time to put it back together. Here's how to reassemble your Henry Lever Action Rifle step by step.

Remember, re-assembly is the reverse of disassembly. If you followed the steps above carefully, you should have no problem putting your rifle back together again.

Reassembly: Action

1. **Install the lever and sear** as a unit. Make sure the spring is correctly seated and the lever operates smoothly. Use a roll pin to secure them in place.

2. **Install the hammer**. Ensure the hammer strikes the firing pin with enough force and that the sear engages the hammer properly.

3. **Install the trigger and trigger guard**. Ensure the trigger moves freely and the safety functions properly.

4. **Reinstall the trigger pin**. This will secure the trigger and trigger guard assembly.

Reassembly: Field Stripping

1. **Slide the stock** onto the barreled action. Ensure it's properly seated and aligned.

2. **Reinstall the stockscrew**. Use a coin or a stock screws tool to secure the stock in place.

3. **Check the action**. Ensure the lever operates smoothly, and the rifle is ready for use.

Always remember to handle your rifle with care and to keep it unloaded and safe when not in use.

Regular disassembly, cleaning, and lubrication are essential for maintaining your Henry Lever Action Rifle's performance and longevity. It's a satisfying process to understand your rifle intimately and keep it in top condition. Happy shooting and safe handling!

AD