how to disassemble a glock 19 slide

Dissemble Your Glock 19: Step-by-Step Slide Disassembly

By Andrew Davis
AD

Disassembling a Glock 19 slide may seem daunting at first, but with patience and the right steps, it can be a straightforward process. Whether you're cleaning your Glock 19 or performing a reassembly drill, knowing how to disassemble the slide is a crucial skill for responsible gun ownership.

Before we dive into the process, ensure you have a clean, well-lit workspace, and always remember the three safety rules: keep the gun pointed in a safe direction, keep your finger off the trigger until ready to shoot, and be sure of your target and what's beyond it.

Preparation and Safety

Before starting, gather all necessary tools. You'll need a bench vise with a clamp suitable for the Glock slide, a Glock disassembly tool or a small punch, and a barrel removal tool or a small, flat screwdriver.

AD
Glock Slide disassembly + update
Glock Slide disassembly + update
How a Glock Works
How a Glock Works
How To Glock Disassembly & Reassembly
How To Glock Disassembly & Reassembly

Once you have your tools, ensure your workspace is safe by removing any clutter and wearing appropriate eye protection. Always assume the gun is loaded until you've personally confirmed it's unloaded and rendered safe.

Rendering the Gun Safe

Start by retracting the slide to verify there's no ammunition in the chamber. Pull the slide back slowly and use a Garibaldi tool or similar device to hold the slide back without forcing it. Then, visually inspect the chamber and the magazine chute to ensure no ammunition is present.

Glock 19 firing action (World of Guns: Gun Disassembly simulation) - YouTube Canon Breech Lock Fit, 1911 Exploded View, Steel Bolt With Rapid Fire Kit, How To Assemble A Trigger, P80 With Switch, Airgun Bullet Density Comparison, Glock19 Drawing, G17 Switch, G19 With Switch
Glock 19 firing action (World of Guns: Gun Disassembly simulation) - YouTube Canon Breech Lock Fit, 1911 Exploded View, Steel Bolt With Rapid Fire Kit, How To Assemble A Trigger, P80 With Switch, Airgun Bullet Density Comparison, Glock19 Drawing, G17 Switch, G19 With Switch
2.6M views · 66K reactions | How a Glock Works “A man’s rights rest in three boxes: the ballot box, the jury box, and the cartridge box.” -Frederick Douglass Guns ARE Essential ➡️ https://bit.ly/2XxJxbT Video By: | Colion Noir
2.6M views · 66K reactions | How a Glock Works “A man’s rights rest in three boxes: the ballot box, the jury box, and the cartridge box.” -Frederick Douglass Guns ARE Essential ➡️ https://bit.ly/2XxJxbT Video By: | Colion Noir

Press the takedown levers to release the slide. Once released, pull the slide off the frame. This is your gun now in its safe, unloaded state. Place the slide and frame in separate safe areas to avoid accidentally misassembling them.

Removing the Barrel

With the slide still separated from the frame, lay the slide on a flat surface. Use a barrel press or a strong, flat-headed punch to press on the barrel to remove it from the slide. Be cautious not to hammer directly on the barrel as it can cause damage.

AD

If you're using a barrel removal tool, align the tool with the hole on top of the slide and press down. The barrel should slip out of its channel with minimum force. Once the barrel is out, set it aside and ensure it's free of any fouling.

Disassembling the Slide

Now that the barrel is out, you'll need to access the captive recoil spring and guide rod for cleaning. To do this, flip the slide over and locate the slide release tab on the left side of the slide.

Use the Glock disassembly tool or a small punch to press down on the tab. While pressing down, use your other hand to pull the slide release lever towards you. With a little bit of force, the lever will snap off and the slide lock spring will pop out.

AD

Removing the Recoil Spring and Guide Rod

Next, you'll remove the recoil spring and guide rod. With the slide release lever off, look at the right side of the slide and locate the small hole on the slide rail.

Using a small flat-headed screwdriver or a similar tool, gently tap the ejector pin from the outside of the slide. As you do this, press down on the slide release lever simultaneously to push the captive recoil spring and guide rod out of the slide. They should pop out with minimum resistance.

Cleaning the Slide

With all the internal components removed, you can now thoroughly clean the slide. Use a cleaning rod and patches, along with your preferred gun cleaner and lubricant, to clean the interior and exterior of the slide.

AD

Ensure you remove all fouling and carbon buildup, including the rail where the barrel fits. Allow the slide to air dry before applying a light coat of oil to all moving parts and exterior surfaces.

After cleaning, the final step is to reassemble the slide. The process is essentially the reverse of disassembly. Ensure you push everything back into place firmly but gently, and apply just enough force when re-installing the barrel. Once everything is back together, perform a functional check to ensure your Glock 19 slide is working as intended.

Regular disassembly and cleaning are key to maintaining your Glock 19 in optimal condition. Familiarizing yourself with the parts and the process not only ensures a well-maintained gun but also provides an opportunity for shooters to appreciate the engineering and design of this popular pistol.

AD