how to cut molding outside corners

How to Cut Molding Outside Corners

By Michael Jones
AD

Cutting the perfect miter for an outside corner when installing crown molding, chair railing, or baseboard can transform a mundane room into a showpiece. This precision cut creates a beautiful, seamless transition from one wall to another. Let's delve into this task, providing you with a comprehensive guide on how to cut molding outside corners while keeping it accessible and engaging.

Before we begin, ensure you have a miter saw, a sharp miter saw blade, and safety gear. Familiarize yourself with your miter saw's angle settings and practice on scrap pieces before tackling your actual moldings. Now, let's dive into the process.

Marking and Measuring for Accuracy

Begin by marking the molding pieces at the appropriate lengths. Use a measuring tape from the corner out to the wall to determine the length of each side of the miter. Transfer this measurement to the molding piece, marking both sides of the corner.

AD
How to Cut Crown Molding Laying Flat – With Easy Reference Templates
How to Cut Crown Molding Laying Flat – With Easy Reference Templates
how to neatly cut the corners
how to neatly cut the corners
DIY Outside Corner Molding for Cheap - Scavenger Chic
DIY Outside Corner Molding for Cheap - Scavenger Chic

To ensure squareness, use a combination square or speed square to mark a perpendicular line through your measuring line. This will act as a reference point for your miter saw's fence.

Setting Up Your Miter Saw

Set your miter saw to a 45-degree angle. This will create the miter cut that allows the edges of the two pieces to seamlessly connect. For the first piece you'll cut, place the previously marked edge against the miter saw's fence, and the perpendicular line should align with the fence's outer edge.

a hand holding a piece of white paper on top of a wooden table
a hand holding a piece of white paper on top of a wooden table

With the fence in position, make your cut. You should now have one mitered piece. Set it aside and repeat the process with the other piece. The second piece will require you to flip the molding piece over when aligning it against the fence. This will ensure the cut faces in the opposite direction, creating a perfect outside corner.

Calculating Adjusted Angles for Common Wall Imperfections

Not all rooms are perfectly square. Wall imperfections can cause your mitered corners to appear unless you calculate and use adjusted angles. To account for these common problems, you can use a simple calculation: if you're above the desired wall length, add to your miter angle; if you're below, subtract. For example:

AD
 Walls too long by 1/8": Add 3/8 degrees to each miter
 Walls too short by 1/8": Subtract 3/8 degrees from each miter

Precision is key here. Use a miter saw with a bevel scale that precisely shows fractions of a degree. Practice your adjustment cuts on scrap pieces to ensure your calculations are correct before cutting your actual moldings.

Checking and Fine-Tuning Your Miter Joints

Once your miters are cut, check them for proper tightness using a miter joint test kit, which is a simple tool for precisely testing miter joints. It will help you identify any gaps or loose joints, ensuring you don't have to recut pieces due to poor test fitting.

If you find gaps, slightly adjust your miter angles or the angle of your miter saw's fence and recut until the test kit reports a tight miter. By fine-tuning your miters, you'll save on valuable molding material that would otherwise be wasted from multiple cuts.

AD

Installing Your Moldings

Before installing your moldings, apply painter's tape to protect the walls, as necessary, and then adhere the moldings using your preferred method - usually nailing or using a specialized adhesive. Ensure the outside corners sit flush with one another for a seamless look.

Use a level to double-check that each piece is installed squarely and perfectly aligned with the ceiling or floor, as needed. Fill any remaining gaps with wood filler, smooth it over with sandpaper, paint, and you're ready for the final reveal.

Learning to cut molding outside corners is a rewarding skill that adds a professional touch to any DIY project. Practice on scrap pieces, be patient, and don't hesitate to consult with a professional if you encounter issues. Now that you've mastered this technique, you're ready to transform your living space into a showpiece.

AD
AD