Mastering Shiplap: Expert Guide to Finish Outside Corners
Embarking on a shiplap exterior project can breathe new life into your home's curb appeal. But how do you handle those all-important outside corners? Mastering the technique is key to achieving a cohesive, professional look. Let's dive into a step-by-step guide on how to finish shiplap outside corners for a stunning, picture-perfect result.
Preparation: Tools and Materials
Before you start, ensure you've got the right tools and materials:
- Tape measure
- Circular saw or miter saw
- Jigsaw (for intricate cuts)
- Cordless drill
- Level
- Caulk gun
- Paint (exterior grade)
- Paintbrush or roller
- Safety glasses
- Ear protection
- Dust mask
The star of our show is, of course, the shiplap itself. Opt for a high-quality, durable material like cedar or composite for your exterior project.
Step 1: Measuring and Cutting
The key to a perfect corner is precise measurement and cutting:
Measure Twice, Cut Once
Ensure your measurements are accurate to maintain the straight, clean lines of shiplap. Use your tape measure to calculate the length of your cuts and mark them clearly on the material.
When cutting, use a circular saw or miter saw for straight cuts. For intricate cuts, like chamfers orcope cuts, a jigsaw with a fine-tooth blade will give you the precision you need.
Edge Alignment
Begin your cuts at the edge of the shiplap board, following the pre-made rabbet (groove) along the material's length. This will ensure that your cuts align perfectly with the board's width, creating a seamless, interlocking corner.
Step 2: Aligning the Corner
Positioning the boards correctly is crucial for a strong, visually appealing corner:
Choose Your Corner Type
exterior shiplap corners can be either butted or mitered. Butted corners are simple and fast but lack the clean look of mitered corners. Mitering requires a bit more skill but results in a sleek, professional finish.
For this guide, we'll focus on mitered corners.
Install the First Board
Start by installing the first board of your shiplap corner according to your project's guidelines. Ensure it's level and securely attached to the wall using your cordless drill and appropriate screws or nails. Leave a small gap (about 1/8" to 1/4") between the board and the corner to accommodate the miter.
Step 3: Making the Miter Cut
Creating a perfect miter is the secret to a crisp shiplap corner:
Calculate the Angle
The standard miter angle for shiplap corners is 45 degrees. However, you may need to adjust this angle slightly depending on your wall's thickness and the desired reveal of your shiplap boards.
Use a miter saw or set the bevel on your circular saw to the desired angle and make your cut.
Dry-Fit and Adjust
Before making your final cut, dry-fit the mitered board into the corner to ensure a tight fit. Adjust your miter angle as needed to achieve a seamless, tight-fitting corner. Once you're satisfied with the fit, proceed with your final cut.
Step 4: Installing the Mitered Board
Now it's time to attach your mitered board and complete the corner:
Align and Fasten
Position your mitered board into the corner, ensuring a tight fit against the first board and the wall. Use your level to ensure it's straight and plumb. Once you're satisfied with the alignment, secure the board into place using your cordless drill and appropriate fasteners.
Start with screws or nails in the center of the board, working your way outwards to ensure a strong, even attachment.
Caulking and Painting
After your mitered corner is securely fastened, fill any gaps between the boards and the wall with exterior-grade caulk. Allow the caulk to dry and sand it smooth if necessary. Then, apply a coat of exterior-grade paint to seal and protect your shiplap corner.
Congratulations! You've successfully finished your shiplap outside corner. It's a rewarding feeling to see the transformation a well-crafted corner can bring to your home's exterior. Now that you've mastered this technique, you can take on more exterior DIY projects with confidence.
But remember, the journey doesn't end with the finished corner. Regular maintenance, like inspecting for signs of wear and tear and touching up paint as needed, will ensure that your shiplap exterior stays beautiful and durable for years to come.