how to clean a revolver 38 special

Mastering Revolver Care: A Step-by-Step Guide to Cleaning Your 38 Special

By Thomas Moore
AD

Caring for your 38 Special revolver involves regular cleaning to ensure its longevity and optimal performance. A thorough cleaning not only removes debris and residue but also helps prevent corrosion and malfunction. Here's a step-by-step guide on how to clean your 38 Special revolver, ensuring it remains in top working condition.

Before we begin, gather your cleaning supplies. You'll need a few essential tools: a bore snake or cleaning rod, muzzle brush, cotton patches, Leonard cleaning solvent, olive oil, a jag or patch holder, a cleaning cloth, and a good quality bore brush if your revolver's cylinder doesn't lock open.

Disassembly and Initial Cleaning

Start by ensuring your revolver is unloaded and safe. Open the cylinder and visually inspect the chambers to confirm no ammunition remains. Then, follow your revolver's specific disassembly instructions. Generally, this involves removing the forcing cone, barrel, and cylinder for cleaning.

AD
How to Clean a Charter Arms 38 Special Revolver. (SUPER EASY WAY!!) #guncleaning
How to Clean a Charter Arms 38 Special Revolver. (SUPER EASY WAY!!) #guncleaning
How to Clean a Revolver
How to Clean a Revolver
The Basics of Cleaning Your Revolver
The Basics of Cleaning Your Revolver

Use a muzzle brush dipped in Leonard cleaning solvent to scrub the bore from the muzzle to the chamber. This helps to loosen and remove fouling, residue, and any stubborn debris. Be sure to work from muzzle to chamber to avoid pushing debris further into the barrel.

Cleaning the Cylinder

If your revolver's cylinder locks open, use a bore brush to scrub each chamber and the ejector rod channel. Dip the brush in Leonard cleaning solvent and work it vigorously to ensure all residue is removed. If your cylinder doesn't lock open, use a small ammunition mop or a suitable-sized bore brush to clean each chamber.

Learn How to Clean a Revolver in 10 Easy Steps
Learn How to Clean a Revolver in 10 Easy Steps
Lazy Guy Guide To Revolver Cleaning
Lazy Guy Guide To Revolver Cleaning

Next, use a clean, wet (with Leonard solvent) cotton patch to wipe the exterior of the cylinder carefully. Pay special attention to the latch and the area around the cylinder pine, where carbon and debris can build up. Allow the cylinder to air dry completely before moving on.

Deep Cleaning the Barrel

With the cylinder removed, use a bore snake or cleaning rod with a suitable jag or patch holder to clean the full length of the barrel. Start by wiping the chamber and forcing cone with a dry patch to collect any loose dirt. Then, apply a small amount of Leonard cleaning solvent to a patch and run it through the barrel from muzzle to chamber.

AD

Repeat this process using fresh, wet patches until the patches come out clean. After cleaning, run a dry patch through the barrel several times to remove any residual solvent. If desired, you can use a one-way bore cleaner or a brass brush for a more thorough cleaning, but take care not to damage the barrel's rifling.

Reassembling and Lubricating

Once the revolver and its components are clean and dry, reassemble the revolver according to the manufacturer's instructions. Ensure all parts are properly aligned and function correctly before operation.

After reassembly, lubricate the revolver using a light coating of olive oil or a commercial gun oil designed for use with metallic cartridges. Apply the lubricant to the exterior of the gun, focusing on moving parts such as the cylinder latch, trigger, and hammer. Additionally, apply a small amount of lubricant to a patch and run it through the bore to prevent rust.

AD

Final Inspection and Safety Check

Perform a final safety check to ensure the revolver is still unloaded and functioning correctly. Cycle the action several times to distribute the lubricant and ensure all moving parts operate smoothly. Any unexpected resistance or malfunction should be addressed promptly.

Always store your 38 Special revolver safely, unloaded, and with the action open when not in use. This helps prevent rust and ensures the gun remains in good working order for future use.

Regular maintenance is key to preserving the lifesplood of your 38 Special revolver. By cleaning and lubricating your revolver as described above, you'll ensure it remains ready for use and retains its value for years to come. Happy shooting!

AD
AD