how to clean a 38 special revolver

Step-by-Step Guide: Cleaning Your 38 Special Revolver

By Joseph Wilson
AD

When it comes to maintaining a 38 Special revolver, routine cleaning is not only recommended but crucial. Not only does it keep your weapon in good working order, but it also ensures your safety and improves its overall lifespan. Here's a step-by-step guide on how to clean a 38 Special revolver thoroughly and safely.

Before you start, gather all the necessary tools: protective gloves, cleaning patches, cotton swabs, a bore brush, a cleaning rod or bore snake, gun solvent, lubricating oil, and a cleaning kit specifically designed for revolvers. Choose a well-ventilated area or wear gloves to protect your hands from harsh chemicals.

Disassembly and Initial Cleaning

The first step in cleaning a 38 Special revolver involves disassembly, which is straightforward. Start by ejecting any rounds in the cylinder and make sure to clear the chamber as well. Then, release the cylinder latch and remove the cylinder from the revolver.

AD
How to Clean a Charter Arms 38 Special Revolver. (SUPER EASY WAY!!) #guncleaning
How to Clean a Charter Arms 38 Special Revolver. (SUPER EASY WAY!!) #guncleaning
How to Clean a Revolver
How to Clean a Revolver
Lazy Guy Guide To Revolver Cleaning
Lazy Guy Guide To Revolver Cleaning

Once disassembled, begin by giving the revolver a quick wipe down with a cleaning patch or cloth to remove any loose dirt or debris. This initial step helps prevent larger particles from被被 deeper into the weapon during the cleaning process.

Cleaning the Barrel

Begin with the barrel, as it's the most critical component. Apply a generous amount of gun solvent onto a bore brush or a bore snake, then push it through the barrel in one direction - typically from the chamber end towards the muzzle.

What I Learned Putting My .38 Specials Up Against My Go-To Semi-Auto - Survival World
What I Learned Putting My .38 Specials Up Against My Go-To Semi-Auto - Survival World
Cleaning Rossi Model 88 .38 Special
Cleaning Rossi Model 88 .38 Special

Allow the solvent to sit for a few minutes to break down any carbon fouling or residue. Next, pull the bore brush or bore snake back through the barrel. Repeat this process, alternating between pushing and pulling, until the cleaning patch comes out clean.

Cleaning the Cylinder and Chambers

The revolver's cylinder and chambers should receive the same attention as the barrel. Apply solvent to a small brush or cotton swab and scrub the inside of each chamber. Rotate the cylinder to ensure all chambers are cleaned evenly.

AD

To clean the exterior of the cylinder, wipe it down with a solvent-soaked cleaning patch or cloth. Be sure to clean the cylinder latch and the underside of the barrel simultaneously, as these are common places for dirt and debris to accumulate.

Detailed Cleaning of Individual Components

Now that you've disassembled and given your revolver a basic clean, it's time to focus on specific components.

Start with the ejector rod and its housing. This mechanism can accumulate dirt and debris, which can impact the revolver's function. Using a cotton swab or small brush, dip into solvent and clean the ejector rod and its housing, ensuring no residue remains.

AD

Cleaning the Trigger and Action

The trigger and action components should be wiped down with a solvent-soaked cleaning patch. Pay particular attention to the trigger, hammer, and internal action surfaces. Ensure that no grit or grime is left behind, as this could hinder the weapon's smooth operation.

Take a moment to inspect the trigger return spring and plunger. These components are often overlooked but are crucial to the revolver's functionality. Ensure they are free of debris and lubricate lightly with a few drops of oil.

Cleaning the Frame and Exterior

The revolver's frame and exterior can be cleaned with a solvent-soaked patch or cloth. Pay close attention to the Crane trigger, cylinder latch, and any other moving parts. Ensure these components are free of grit and grumble and lubricate them lightly with a few drops of oil.

AD

The grip panels should also be cleaned. You can use a mild detergent to clean off any dirt or oil before lubricating. As the grips are often made of wood or other porous materials, be extra careful not to apply too much lubricant, as it could potentially damage the grips.

Reassembly and Lubrication

Now that your revolver is clean, it's time to reassemble it. Always ensure that the cylinder aligns correctly with the chamber before you slide it back onto the revolver. Once secure, give the cylinder a spin to verify its freedom of movement.

To complete the cleaning process, lubricate your revolver. Apply a small amount of the appropriate lubricant to a clean patch and wipe down the major components - the cylinder latch, trigger, hammer, and action surfaces. Avoid applying lubricant to the barrel or chamber, as this could potentially attract dirt and debris in the future.

Regular cleaning is an essential part of maintaining a 38 Special revolver. By following these steps, you'll keep your weapon in optimal condition, ensuring its longevity, and enhancing your safety. The final result will be a well-maintained, reliable, and secure 38 Special revolver.

AD