how to clean a craftsman lawn mower carburetor

How to Clean a Craftsman Lawn Mower Carburetor

By Mark Davis
AD

Spring has sprung, and it's time to dust off your Craftsman lawn mower and get that yard looking pristine. However, before you fire up your mower and tear through those dandelions, you'll want to ensure it's in top working order. A well-maintained carburetor is key to optimal performance, and today we'll guide you through a step-by-step process on how to clean your Craftsman lawn mower carburetor for improved efficiency and longevity.

The carburetor in your Craftsman lawn mower is responsible for mixing air and fuel to generate the delicious combustion your engine loves so much. Over time, this little marvel can accumulate dirt, debris, and old fuel, leading to performance issues. But fear not, for this task is not as daunting as it may seem. With the right tools and a bit of patience, you'll have that carburetor sparkling in no time.

Gathering Your Tools

Before you start, make sure you have everything you need at your disposal. Gathering your tools beforehand will save you from unnecessary trips to the garage, which can have you cleaning your carburetor like a pro in no time.

AD
a lawn mower with the words how to clean lawn mower carburetor without removing it
a lawn mower with the words how to clean lawn mower carburetor without removing it
How to Use Lawn Mower Carburetor Cleaner
How to Use Lawn Mower Carburetor Cleaner
Carburetor Repair, Maintenance & Adjustment How-To Guide
Carburetor Repair, Maintenance & Adjustment How-To Guide

Here's a list of essential tools and materials you'll need:

  • Rubber gloves
  • Screwdriver (usually Phillips, but check your mower's manual)
  • Needle-nose pliers
  • Clean rags or shop towels
  • Carburetor cleaner spray (such as Berryman B-12 Chemtool or WD-40)
  • Plastic container or bag for small parts
  • Heating pad (optional, for faster drying)
  • New gasket if needed (consult your mower's manual)

Preparation: Safety First

Before diving into the heart of your Craftsman lawn mower, ensure you've taken necessary safety precautions. Always disconnect the spark plug wire to prevent unexpected engine startup. Additionally, lay down a drop cloth or work on a flat surface to keep things neat and organized.

How to Clean a Lawn Mower Carburetor (Step By Step Guide)
How to Clean a Lawn Mower Carburetor (Step By Step Guide)
How to Clean Riding Mower Carburetor (Fix Hard Starts Fast)
How to Clean Riding Mower Carburetor (Fix Hard Starts Fast)

Always wear rubber gloves to protect your hands from harsh chemicals and to prevent oil stains. If you're working on a lawn mower with a pull-cord starter, it's a good idea to unscrew the pull-cord from the flywheel to make the disassembly process smoother.

Disassembling the Carburetor

With the preemptive strike on safety taken, you're ready to start dismantling your Craftsman lawn mower carburetor. First, locate the carburetor at the end of the engine, near the air filter. It is usually held in place by two mounting bolts.

AD

Using your screwdriver, loosen and remove these bolts, then gently pull the carburetor away from the engine. Be extra cautious not to bend or damage the delicate fuel lines attached. If your mower has a linkage connected to the throttle, now is the time to remove it, using your needle-nose pliers if necessary.

Cleaning the Carburetor

With the carburetor separated from the engine, it's time to give it a thorough cleaning. First, remove the float bowl by unscrewing it from the bottom of the carburetor. Place it in your plastic container or bag to avoid misplacing any small parts.

Inspect the inside of the float bowl and the area around the jets for any signs of debris or old fuel contamination. If necessary, use a needle-nose pliers to remove any obstructions, such as old fuel filters.

AD

Soaking the Carburetor

Now that you've prepped your carburetor for a deep cleaning, it's time to break out the heavy artillery: your chosen carburetor cleaner. Liberally spray the cleaner into the carburetor's throat and thefloat bowl's interior, ensuring complete coverage.

Place the carburetor and float bowl in a separate plastic bag or container, then leak-proof the opening. Give the carburetor a good shake to allow the cleaner to reach all those nooks and crannies. Once adequately coated, let the carburetor and bowl soak for around 15-30 minutes, allowing the cleaner to break down and dissolve any grime, corrosion, or old fuel.

Rinsing and Drying

After soaking, spray the inside of the carburetor and float bowl with clean water to rinse off the carburetor cleaner. Use a clean rag or shop towel to blot dry the interior, paying particular attention to the jets and small orifices. Be meticulous, as any remaining water or cleaner residue can negatively impact your mower's performance.

AD

To speed up the drying process, you can apply a heating pad to the carburetor. Ensure it isn't too hot to avoid damaging the plastic components. Allow the carburetor to dry for at least an hour or two before proceeding to the next step.

Reassembling the Carburetor

With a pristine, dry carburetor in hand, it's time to piece everything back together. Begin by installing the float bowl, ensuring it's securely attached with the arrow (usually marked on the bowl) pointing in the same direction as your mower's air filter.

At this point, if your mower's linkage was connected to the throttle, reattach it now. Reconnect any plastic fuel lines carefully, and ensure they're not kinked or broken. Lastly, reinstall the carburetor onto the engine, aligning the gasket (if applicable) and securing it with the mounting bolts.

Reinstalling the Spark Plug and Pull-Cord

With the carburetor back in place, reattach the spark plug wire and, if applicable, screw the pull-cord back onto the flywheel. Ensure it's tight and properly aligned with the mower's body. Now, your Craftsman lawn mower is ready to purr like a kitten with a new toy.

Before pulling the starter rope, give your mower a few primes with the fuel primer bulb (if equipped) on the side of the engine. This will ensure the newly cleaned carburetor is flooded with fresh fuel and air.

Now comes the anticlimactic moment of truth - pull the starter cord. Your Craftsman lawn mower should fire up with renewed vigor, signaling you've successfully conquered carburetor cleaning. Give yourself a pat on the back, and put your tools away until next time.

As you prepare to tame that jungle of a lawn, remember to store your mower correctly and maintain it regularly. The better you care for your Craftsman lawn mower, the more it'll appreciate your efforts with reliable performance and longevity.

Happy mowing!

AD