How to Clean Your Bissell Revolution Carpet Cleaner
Keeping your Bissell Revolution carpet cleaner in pristine condition enhances its performance and longevity. Regular cleaning and maintenance are key to ensuring your machine remains effective at removing stains and dirt from your carpets. In this guide, we'll walk you through the steps on how to clean a Bissell Revolution carpet cleaner, keeping it ready for action whenever you need it.
Before we dive into the cleaning process, remember that prevention is always better than cure. Here's a tip to keep your carpet cleaner in top shape: Always empty and rinse the tank after each use to prevent residue buildup. Now, let's get started with the cleaning process.
Unplugging and Initial Preparation
As with any electrical appliance, the first step is to ensure safety by unplugging the machine from the power source. This step might seem obvious, but it's crucial to prevent any accidents during the cleaning process.
Next, prepare your cleaning solution. Bissell recommends using their SpotBot Cleaner with Oxy Stain & Odor Remover for thorough cleaning.Otherwise, a mild detergent and water solution will suffice.
Cleaning the Tank
The tank is where the cleaning solution resides, so it's essential to keep it clean. First, remove the tank from the machine and detach the lid. Then, pour out any remaining solution and rinse the tank with clean water.
To ensure complete cleanliness, fill the tank halfway with warm water, add a small amount of mild detergent, and swish it around to create some suds. Let it soak for a few minutes, then rinse it thoroughly. Ensure there are no soap residue left to avoid affecting the performance of your cleaner.
Cleaning the Hose and Tools
The hose and tools on your Bissell Revolution are in constant contact with dirt and stains. Keeping them clean prevents the buildup of grime and ensures optimal performance. After each use, wrap the hose around the cleaner and store it with the control panel facing up to prevent kinks.
Clean the tools by submerging them in the same solution used for the tank, allowing them to soak for a few minutes before rinsing them off. Inspect the brushes and replace them if they show signs of wear or tear, as this could affect the cleaner’s performance.
Rinsing and Final Touches
Once you've thoroughly cleaned the tank, hose, and tools, it's time to rinse the entire unit. Use a damp cloth to wipe down the exterior, ensuring that you remove any dirt or debris.
Pay special attention to the tracks and wheels. Use a stiff-bristled brush to remove any caked-on dirt. You can also use a mild detergent and water solution for this purpose. Be sure to rinse thoroughly and allow everything to dry completely before storing.
Storing Your Bissell Revolution
To ensure your carpet cleaner remains in peak condition, proper storage is essential. After cleaning and drying, reattach the tank and all tools. Then, store the unit in a cool, dry place, away from direct sunlight and heat sources.
Avoid storing it in the upright position for extended periods as this can cause the machine to leak. Keep it on its side or flat to prevent any potential issues. Always unplug the machine from the power source before storing it away.
By following these guidelines, you're guaranteed to keep your Bissell Revolution carpet cleaner in top shape, ready to tackle any carpet cleaning challenge that comes its way. Regular cleaning and maintenance not only extend the life of your machine but also ensure that it performs at its best whenever you need it. Happy cleaning!