Optimize Your Cleaning: Mastering the Bissell Big Green Carpet Cleaner
Tired of visible dirt and stains making your carpets look dull? The BISSELL Big Green Carpet Cleaner is here to transform your home, providing a deep, thorough clean that leaves your carpets looking and smelling fresh. Let's dive into how to use this powerful machine for optimal results.
Before we start, ensure you have your BISSELL Big Green Carpet Cleaner, the Dirty Water Tank, the Clean Water Tank, theMachine Monitor, the cleaning formula, and microfiber brushes ready. Now, let's get started!
Preparation and Initial Setup
The first step is preparing your BISSELL Big Green and the room you'll be cleaning.
Empty the Dirty Water Tank and rinse it. Fill the Clean Water Tank with warm water and add the recommended amount of BISSELL's cleaning formula. Assemble the machine, attach the hose and stairs tool, and switch on the machine for a test run.
Pre-treating Stains
Certain stains require a little extra attention. For these, spread a small amount of the cleaning formula directly onto the stain, let it sit for 5-10 minutes, then gently massage it in with the machine's microfiber brush.
Remember, always test this method on a small, hidden area first to ensure it doesn't damage your carpet.
Before You Begin Cleaning
Clear the room of any obstacles, and remove any non-carpeted areas from the path of your cleaner. This ensures you can move freely and avoid unnecessary wear and tear on your machine.
Vacuum the area thoroughly to remove any loose dirt, dust, or particles, as this helps the cleaner work more effectively and prevents clogging.
Cleaning Your Carpet with the BISSELL Big Green
Now that you've prepared the machine and the room, let's dive into the main cleaning process.
Start at the farthest corner of the room and work your way backward. This ensures you don't step on any freshly cleaned areas and helps you stay organized.
Using the Machine
With the machine in the 'Clean' mode, gently glide it across your carpet. Overlap each pass slightly to ensure no spots are missed. Apply even, firm pressure as you move. If you encounter any tough stains, switch to the 'Backup' mode to target the area more aggressively.
Regularly check the machines' Dirty Water Tank and empty it as it fills, ensuring the process runs smoothly.
Cleaning Stairs and Edges
Once you've covered the main area, switch to the stairs tool for cleaning staircases and edges. The ‘EdgeSweep' technology helps clean along baseboards and under obstacles.
For stairs, start at the top and work your way down, using overlapping, firm strokes. Be cautious, keep one hand on the staircase at all times, and follow the same pre-treating process for any tough stains.
Once you've finished, ensure you thoroughly rinse the machine, empty and clean both water tanks, and store your BISSELL Big Green until the next time your carpets need a refresh. That's it! Your carpets should now be looking fresh and feeling clean.
As a final thought, consider investing in a regular carpet cleaning routine. Not only does this help keep your home clean and inviting, but it also prolongs the life of your carpets, making the most of your BISSELL Big Green Carpet Cleaner.