how to change water spigot

Change Water Spigot: Step-by-Step Guide

By Rachel Anderson
AD

Changing a water spigot, also known as an outdoor faucet, can be a simple DIY task once you understand the process. Whether it's due to leaks, rust, or simply wanting to update the look of your outdoor space, this step-by-step guide will walk you through the process to help you achieve a successful result.

Before you start, ensure that the water to the spigot is turned off. If you're unsure, locate your home's main water shutoff valve and turn it clockwise until it stops. Also, gather your necessary tools and materials, which might include adjustable wrenches, a screwdriver, teflon tape, and a replacement spigot if needed.

Determining Whether to Repair or Replace Your Spigot

It's important to assess the condition of your current spigot before you begin. teasing apart replacement vs. repair will depend on the extent of damage. If your spigot is leaking from the handle or the base, repairing it might be the best solution. However, if it's leaking from the middle, that could indicate a more serious internal problem, and replacement may be necessary.

AD
💧Fix Your Leaky Spigot with Our DIY Guide!
💧Fix Your Leaky Spigot with Our DIY Guide!
How to Replace an Outdoor Water Spigot
How to Replace an Outdoor Water Spigot
How to Upgrade to a Modern Water Spigot | Mr. Fix It DIY
How to Upgrade to a Modern Water Spigot | Mr. Fix It DIY

To repair minor leaks, you might be able to tighten the spigot packing or replace the entire internal stem. For more severe issues, consider replacing the spigot entirely. Remember, the cost of materials and time investment might make a replacement more feasible than you initially thought.

Repairing Your Spigot

If you've decided to repair your spigot, start by removing the bonnet nut and packing nut with an adjustable wrench. Next, unscrew the handle and the stem. If the leak is at the top, replace the internal O-ring or related seals and rebuilt. If the leak is around the middle around the faucet body, it's best to replace the entire stem.

How To Turn Off Outside Water and Spigot For Winter
How To Turn Off Outside Water and Spigot For Winter
How to Replace an Outdoor Water Spigot
How to Replace an Outdoor Water Spigot

To add durability to the repaired area, apply a layer of teflon tape around the area, reassemble the parts, and tighten them back into place. Be sure not to overtighten as this could cause further damage.

Replacing Your Spigot

If you decide to replace the spigot, start by disconnecting the water supply line from the spigot. Then, remove the three bolts that hold the spigot to the wall and manoeuvre the spigot out from the wall.

AD

Install the new spigot by reversing the removal process. Make sure to align the supply line properly and incrementally tighten the three bolts that hold the spigot in place. Turn the water back on and check for leaks.

Tips for Maintaining Your Spigot for Optimal Performance

To prevent future issues, consider the following maintenance tips. Firstly, during colder months when temperatures dip below freezing, be sure to drain all water from your outdoor faucet system.

Moreover, apply a layer of grease around the packing nut and the valve stem before reinstalling. This can help prevent future leaks by creating a tight seal. Lastly, lubricating the faucet with a few drops of oil inside the end of the spout can also contribute to smooth future usage.

AD

Changing a water spigot might initially seem like a daunting task, but with these tips, you're now armed with the knowledge to handle this project. Plus, the added benefit of enhancing your home's curb appeal is an added bonus. So, why not take the initiative and tackle this DIY project today?

AD