how to change the oil in a husqvarna riding mower

Step-by-Step: Change Oil in Husqvarna Riding Mower

By Mark Harris
AD

Regular maintenance is key to keeping your Husqvarna riding mower in top shape, and changing the oil is a vital part of that maintenance. This straightforward guide will walk you through the process, ensuring your mower continues to deliver excellent performance over time.

Before you start, gather your tools and materials: a wrench (usually 13mm), an oil filter, 12.6 oz of SAE 30 engine oil, and 9.6 oz of 80W-90 gear oil (or as recommended by the Husqvarna manual). Make sure to work in a well-ventilated area, and engage the parking brake to secure the mower.

Draining the Old Oil

The first step is to drain the old oil from your Husqvarna mower. Locate the oil pan beneath the engine, which you can access by tilting the mower on its side.

AD
Husqvarna YTH22V46 Oil Change - How to change the oil in your yard tractor
Husqvarna YTH22V46 Oil Change - How to change the oil in your yard tractor
How to Change Oil on Husqvarna Riding Lawn Mower / Garden Tractor with Kohler Engine
How to Change Oil on Husqvarna Riding Lawn Mower / Garden Tractor with Kohler Engine
How to change the oil on the Husqvarna YTH18542 riding lawn mower
How to change the oil on the Husqvarna YTH18542 riding lawn mower

Place an oil pan underneath the oil pan drain plug. Using your wrench, loosen and remove the plug. Allow the oil to drain entirely into the oil pan. You might need to wait a few minutes for all the oil to drain out completely. Once done, replace the drain plug and ensure it's tightened securely.

Replacing the Oil Filter

Next, remove the oil filter located near the oil pan. Use your wrench to grip and unscrew the filter counterclockwise. After removing the filter, compare it to your new one to ensure you're using the correct replacement.

Husqvarna Riding Lawn Mower Oil Change YTH23V48. Briggs and Stratton 23HP Oil change.
Husqvarna Riding Lawn Mower Oil Change YTH23V48. Briggs and Stratton 23HP Oil change.
Husqvarna Riding Mower Oil Change (Easy!)
Husqvarna Riding Mower Oil Change (Easy!)

Before installing the new filter, lightly coat its rubber gasket with new oil. Screw on the new oil filter by hand, turning it clockwise. Once it's snug, give it about a quarter to half a turn more. Never overtighten the oil filter.

Adding New Oil

Now that the oil pan and filter are clean and ready, it's time to add new oil to your Husqvarna mower.

AD

Locate the oil fill hole on top of the engine. Remove the oil fill cap and insert the spout of your oil bottle. Pour in 12.6 oz of SAE 30 engine oil slowly and steadily.

Checking the Oil Level

Once you've added the recommended amount of oil, allow it to settle for a few minutes. Then, locate the dipstick, wipe it clean, and reinsert it all the way into the oil fill hole.

Remove the dipstick and check the oil level. The oil should be within the 'FULL' range on the dipstick. If the level is low, add more oil in 0.5 oz increments and recheck the level until it falls within the 'FULL' range.

AD

Lubricating the Gear Box

After ensuring the engine oil is at the correct level, move on to lubricating the gear box. First, locate the gear box oil fill hole, usually found on the side of the mower.

Remove the oil fill cap and insert the spout of your gear oil bottle. Add 9.6 oz of 80W-90 gear oil, then allow it to settle for a few minutes before checking the oil level with the dipstick found in the gear box. The oil level should be within the 'FULL' range on the dipstick; adjust as needed.

Now that you've successfully changed the oil in your Husqvarna riding mower, run the engine for about a minute to let the new oil lubricate all components. Remember to turn off the engine after running it. Regular oil changes are essential to keep your mower in top condition, so consult your Husqvarna manual for recommended maintenance intervals. Enjoy your well-maintained mower and happy mowing!

AD
AD