Mastering Strut Swap: How to Change Rear Struts
Replacing your vehicle's rear struts is not as daunting of a task as you may think. With a little bit of knowledge, the right tools, and some elbow grease, you can save yourself a trip to the mechanic and do it yourself. Here's a comprehensive guide on how to change your rear struts.
Before we dive into the step-by-step process, let's quickly discuss what rear struts are and why they need to be replaced. Struts are an integral part of your suspension system, connecting your vehicle to its wheels. They absorb shocks from the road, ensuring a smooth ride. Over time, they can wear out or fail, leading to a bumpy ride, uneven tire wear, and alignment issues. It's essential to replace them when they show signs of damage.
Gathering Tools and Materials
The first step is to gather all the necessary tools and materials. You'll need a jack, jack stands, a lug wrench, a pry bar, a pipe wrench, a breaker bar with a socket, and a ratchet. You'll also need new struts that match your vehicle's make and model, and don't forget to get new strut mounts and pierces.
For safety, make sure to conduct this operation in a safe, level location with enough room to work. Also, engage the parking brake and use wheel chocks to prevent the vehicle from rolling.
Removing the Old Struts
Before lifting the vehicle, you'll want to loosen the lug nuts on the wheels with the struts you're about to replace. This will make it easier to remove the wheels once you've jacked up the vehicle.
Lifting the Vehicle
Using a floor jack, lift the rear of the vehicle until the wheels are off the ground. Place jack stands under the vehicle's frame to securely hold it in place.
Removing the Wheels
With the wheels off the ground, use your ratchet to remove the lug nuts entirely, then remove the wheels. You might need to use a breaker bar to get them off if they're stuck due to corrosion or rust.
Disconnecting the Brake Line and ABS Sensor
Before disconnecting the strut, you'll need to disconnect the brake line and ABS sensor. The brake line usually has a pinched clip that needs to be squeezed to release the line. The ABS sensor just needs to be unplugged.
Using your breaker bar, socket, and ratchet, remove the bolts that secure the strut to the vehicle's body. Be careful not to damage any paint or surrounding components.
Removing the Strut Bushing
The strut bushing can be quite stubborn and require some force to remove. Using a pry bar and ahammer, you can gently tap the pry bar to coax the bushing out. It's crucial to be patient during this step to avoid damaging the vehicle's body.
Removing the Strut
Once the bushing is free, you can pull the strut out of the vehicle. It's usually a good idea to try to remove the strut assembly as a unit, rather than trying to remove the spring and strut tube separately.
Installing the New Struts
Now that you've removed the old struts, you can begin installing the new ones. Make sure to wear gloves to protect your hands from the new strut's powder coating.
Installing the New Strut Bushing
The new strut bushing should press in easily. If it's too tight, try lubricating it with some soapy water. If you're still having trouble, you can gently tap it into place with a hammer.
Securing the Strut
Once the new strut is in place, reinstall the bolts that secure it to the vehicle's body. Hand-tighten the bolts at first, then use your ratchet to tighten them to the specified torque.
Reinstalling the Wheels and Reconnecting the Brake Line and ABS Sensor
With the new struts installed, you can now reinstall the wheels. Make sure to torque the lug nuts to the specified pound-force-feet (lbf•ft), usually around 70-100 lbf•ft.
Reconnect the brake line and ABS sensor, then lower the vehicle from the jack stands using the floor jack. Once the vehicle is back on the ground, give it a good shake to settle the new struts into place.
Remember, it's crucial to replace the struts on both sides of the vehicle, even if only one strut is causing problems. This ensures symmetrical handling and ride quality. Also, don't forget to get an alignment after replacing your struts to ensure your vehicle is pointed in the right direction.
Finally, take your vehicle for a test drive. Pay attention to how it feels as you drive over bumps and around corners. The ride should feel smoother and more controlled than before. If you notice any persistent issues, you may need to take your vehicle to a professional for further inspection. Replacing your vehicle's rear struts is a big task, but with a bit of patience and the right tools, you can do it yourself and save some money. Happy wrenching!