how to change pickguard on strat

Mastering How to Swap Your Fender Strat's Pickguard

By Melissa Hernandez
AD

So, you've decided to breathe new life into your tired Fender Stratocaster by giving it a new pickguard? Great idea! A fresh pickguard can not only update the look of your guitar but also upgrade its functionality. Here's a step-by-step guide on how to change your Strat's pickguard, ensuring your instrument remains in playing shape. Let's dive into this DIY adventure! Remember, patience and precision are key to maintaining your guitar's value and optimal performance.

Before we start, gather your tools: a screwdriver (usually Phillips head for Strats), your new pickguard, and ideally, a guitar pick or a flathead screwdriver for prying. If your new pickguard requires pickguard screws, have those ready too. Now, let's get started!

Preparation and Removal of the Old Pickguard

First things first, turn off your amplifier and unplug your guitar to avoid any electrical mishaps. Also, remove any strings just to be extra safe. Next, we'll remove the old pickguard.

AD
How to Upgrade a Fender Squier Stratocaster
How to Upgrade a Fender Squier Stratocaster
How to Fix a Warped Pickguard | MyRareGuitars.com
How to Fix a Warped Pickguard | MyRareGuitars.com
How to Make a Custom Wood Pickguard
How to Make a Custom Wood Pickguard

Begin by unscrewing the pickguard from the body of your guitar. You'll typically find seven or eight screws, depending on the model and the pickguard size. Once the screws are out, carefully lift the old pickguard off, using a guitar pick or a flathead screwdriver for gentle prying if needed. Set the old pickguard and screws aside.

Inspect the Guitar's Body

Now that your guitar's body is exposed, take a moment to inspect it. Ensure there's no damage, rust, or residue left behind by the old pickguard. If necessary, give it a gentle clean with a soft cloth and guitar polish.

the cover of how to relic a harley benton telecaster
the cover of how to relic a harley benton telecaster
Another Project
Another Project

Check the existing screw holes. If they're stripped or damaged, consider using pickup rings or a बुद्ध/top post to avoid further damage to your guitar's body.

Check Your New Pickguard

Before installing the new pickguard, ensure it's the correct size for your guitar. Fender Strats use standard-sized pickguards, so it's rare to run into issues here. However, double-check just to be sure.

AD

Examine the pickguard for any defects, such as cracks, warping, or incorrect holes. If something seems amiss, consider returning it and getting a replacement.

Installing the New Pickguard

Now that you've ensured everything issorted, it's time to install the new pickguard. Start by placing the new pickguard onto the body of the guitar, aligning it with the existing screw holes. Most new pickguards will come with correct screws, but if not, use the old ones.

begin threading the screws through the pickguard and into the guitar's body. Tighten them gently, using an 'X' or 'star' pattern to avoid warping the pickguard. Be careful not to overtighten, which could strip the holes or damage the pickguard.

AD

Securing the Pickguard

Once all the screws are snug, give the pickguard a gentle wiggle to ensure it's secure and there's no play. If it feels secure, great! If not, tighten or loosen the screws as needed. Remember, it's better to have it slightly loose than too tight.

If your new pickguard doesn't have a pickup or control plate attached, you may need to install these separately. Follow the instructions provided with the pickguard kit to ensure a proper fit.

Reinstalling the Electronics

If you've removed any electronics during the upgrade, now's the time to reinstall them. Match the pickup wires to their corresponding solder points on the pots, and carefully solder them back into place. Be cautious not to overheat the pots or wires, as this can cause damage.

AD

Once the electronics are back in place, reconnect the pickup selector switch, ground wires, and any other components you may have removed. Always ensure all wiring is neat, secure, and tucked away to prevent shorts or buzzing.

Finally, string up your Strat and tune it back to pitch. Turn your amplifier up gently and test your new pickguard. You should be rewarded with a fresh new sound, ready to inspire countless jams! Enjoy your upgraded Strat, and happy strumming!

AD