how to change outlet box

How to Change an Outlet Box: Step-by-Step Guide

By Jessica Garcia
AD

Have you ever needed to change an outlet box but weren't sure where to start? You're not alone. Replacing an electrical outlet box may seem daunting, but with the right steps and a bit of know-how, it's a task anyone can handle. This guide will walk you through the process, ensuring a safe and effective outcome.

Before we dive in, remember that safety is paramount when dealing with electricity. Always ensure the power is off at the circuit breaker, and use a non-contact voltage tester to confirm there's no power flowing to the outlet before starting. Now, let's get started!

Gathering Your Tools and Materials

Ensuring you have the right tools and materials is crucial for a successful outlet box replacement. Here's what you'll need:

AD
How To Replace An Electrical Outlet Box On Drywall | DIY J-Box Install For Beginners!
How To Replace An Electrical Outlet Box On Drywall | DIY J-Box Install For Beginners!
Change Standard Outlet to GFCI- Old Box MELTED!! Replaced With New Box
Change Standard Outlet to GFCI- Old Box MELTED!! Replaced With New Box
an empty room with the words how to add an outlet in 50 seconds on it
an empty room with the words how to add an outlet in 50 seconds on it
  • New outlet box, with the same amperage and voltage rating as the old one
  • Wire nuts (if not already included with the new outlet)
  • 12/2 or 14/2 non-metallic sheathed cable (if needed)
  • Needle-nose pliers
  • Wire strippers
  • Screwdriver (flathead or Phillips, depending on your current outlet)
  • Voltage tester

Choosing the Right Outlet Box

When selecting a new outlet box, ensure it has the same amperage and voltage rating as your current one. For most homes, this will be a 15-amp, 120-volt electrical outlet.

The new outlet should also be a standard 1/2" deep, 3-hole, non-metallic (plastic) box. If you're installing a GFCI (Ground Fault Circuit Interrupter) outlet, make sure your new box is specifically designed for GFCI outlets.

How To Fix An Outlet Box That Sticks Out
How To Fix An Outlet Box That Sticks Out
How to Fix a Loose Electrical Wall Outlet Box
How to Fix a Loose Electrical Wall Outlet Box

Preparing the Wiring

Before removing the old outlet, examine the wiring. copper wires should be 12 or 14-gauge, and the ground wire should be 10 or 12-gauge. If you're unsure about the wiring, consult a licensed electrician before proceeding.

Ensure the wire length is sufficient to reach the new outlet box. If not, you may need to replace the cable with a newer, longer one.

AD

Removing the Old Outlet Box

With your tools gathered and the wiring inspected, it's time to remove the old outlet box. Follow these steps carefully:

Disconnect the Wires

Using your screwdriver, remove the screws securing the outlet to the box. Gently bend the tabs on the back of the outlet to release it from the box. Be cautious not to damage the wires.

Carefully disconnect the wires from the terminals. Note the location of each wire (black for hot, white for neutral, green or bare for ground). Use your voltage tester to ensure there's no power flowing through the wires before touching them.

AD

Remove the Old Box

With the wires disconnected, use your screwdriver to remove any screws securing the box to the drywall or stud. Gently pull the old box out of the wall, releasing any wires still connected.

Installing the New Outlet Box

Now that the old box is out, it's time to install the new one. Follow these steps to ensure a secure fit:

Prepare the Wall Opening

If the new box is larger or needs to be placed elsewhere, you may need to expand the opening in the wall or create a new one. Ensure the opening is just large enough to accommodate the new box, and that no obstructions (like framing members) interfere with its installation.

AD

Use aUse a wall scanner or stud finder to ensure you're not cutting into any hidden obstacles within the wall.

Secure the New Box in Place

Insert the new outlet box into the wall opening, ensuring it's level and plumb. Push it back far enough so that its back edge is flush with the face of the drywall. Use the provided screws to secure the box to the framing members within the wall.

Wiring the New Outlet Box

With the new box securely installed, it's time to connect the wires. Follow these steps:

Strip the Wires

Use your wire stripper to remove about 1/2" of insulation from the ends of each wire. Ensure you only strip the insulation and don't damage the copper wire beneath.

Connect the Wires to the New Outlet

Matching the wire colors to their corresponding terminals on the new outlet, connect the black (hot) wire to the brass-colored terminal, the white (neutral) wire to the silver-colored terminal, and the green or bare (ground) wire to the green-colored terminal.

Tighten the screws securely to ensure a solid connection. Do not overtighten, as this can strip the terminal or break the wire.

Secure the Wires Within the Box

Once the wires are connected to the outlet, use wire nuts to secure the wire connections within the box. Ensure there's enough wire length to allow the outlet to sit flush against the wall when installed.

Push the wires back into the box gently, being careful not to jar the connections or cause wires to touch.

Installing the New Outlet

With the wiring secure, it's time to install the new outlet. Follow these final steps:

Position the Outlet

Place the new outlet into the box, ensuring it's level and the terminals are positioned correctly. Use the provided screws to secure it to the box.

Test the Outlet

Use your voltage tester to ensure there are no power flows to the outlet. Then, plug in a known working device to test the outlet. The device should function properly if everything is wired correctly.

Congratulations! You've just successfully replaced an electrical outlet box. Always double-check your work and ensure everything is secure and functioning properly before considering the job done. If you're ever unsure about any aspect of the process, don't hesitate to consult a licensed electrician.

AD