how to change oil on harley

Harley Oil Change: Step-by-Step Guide

By Kevin Lopez
AD

Change the oil in your Harley-Davidson with confidence. This step-by-step guide will walk you through the process, ensuring your bike's engine runs smoothly and maintains its power.

Before you begin, gather your tools and ensure your motorcycle is on a level surface with the engine cool. Let's dive into the details.

Preparation and Oil Drain

Before you start, gather your tools: an oil filter wrench, an oil filter, 4 quarts of the correct premium motorcycle engine oil, a 14mm socket wrench, and several shop towels. Also, have a drain pan ready.

AD
How To: Harley-Davidson Sportster Oil & Filter Change - YouMotorcycle
How To: Harley-Davidson Sportster Oil & Filter Change - YouMotorcycle
Harley Oil and Filter
Harley Oil and Filter
How to Change Oil on a Harley Harley Davidson Motorcycle & do Routine Maintenance-Biker Podcast
How to Change Oil on a Harley Harley Davidson Motorcycle & do Routine Maintenance-Biker Podcast

First, use the 14mm socket wrench to remove the oil fill cap, which allows air to escape as the oil is draining. This step helps prevent an oil spill.

Draining the Oil

Position the drain pan under the oil pan. The oil pan drain plug is located at the bottom of the engine. Using a 17mm socket wrench, turn the plug counterclockwise to remove it. Allow the oil to drain completely; this could take a few minutes.

How to Change Oil on Harley-Davidson Touring Models by J&P Cycles
How to Change Oil on Harley-Davidson Touring Models by J&P Cycles
How to Change the Oil in a Harley Motorcycle
How to Change the Oil in a Harley Motorcycle

Ensure all the oil is drained by using a shop towel to wipe around the oil pan and drain plug area. This step helps you check for any signs of oil leaks or damage to the drain plug threads.

Replacing the Oil Filter and Drain Plug

Remove the oil filter by turning it counterclockwise using an oil filter wrench. Note that the oil filter is often tight, and you may need to use significant force. Lubricate the seal of the new oil filter with a small amount of new oil.

AD

Once the oil filter is in place, slowly turn the drain plug clockwise to install it. Be careful not to overtighten. The torque spec for the drain plug is typically around 25-30 ft-lbs.

Adding New Oil

Add new oil slowly and steadily. Pouring too quickly can cause air pockets to form, leading to inaccurate oil level readings. Alternate between adding oil and allowing it to settle before checking the level on the sight glass (located on the left side of the engine).

Initially, add about 3 quarts. Check the sight glass to ensure the level is between the "FULL" and "ADD OIL" marks. Once the oil settles, add more oil if necessary to reach the correct level.

AD

Checking the Oil Level

Allow the oil to settle for at least five minutes after the final addition. Then, recheck the oil level on the sight glass. The oil level should be within the range mentioned earlier. If it is not, add or drain oil as necessary to achieve the correct level.

After adding the final amount of oil, let the engine sit for an additional five minutes to ensure oil flows throughout the system. Then, recheck the sight glass one last time to reconfirm the oil level.

Finally, dispose of the used oil and oil filter responsibly. Regular oil changes ensure your Harley-Davidson maintains its power and performance. Ride safe, and enjoy the beautiful machine you've maintained!

AD
AD