how to change oil on a push mower

Step-by-Step: Change Oil in Push Mower

By Olivia Thomas
AD

Regular maintenance is key to optimizing the performance and longevity of your push mower. One crucial aspect of this upkeep is changing the oil, which helps maintain the engine's smooth operation and extends the machine's life. If you're a homeowner who prefers to tackle these tasks yourself, we're here to guide you through the process of changing your push mower's oil with our straightforward, step-by-step guide. Let's dive in.

Before you begin, ensure you have the necessary tools and some essential safety measures in place. You'll need a new supply of oil (consult your owner's manual for the correct type and amount), an oil filter, a wrench, a funnel, an oil catch pan, and possibly some rags for cleaning. Additionally, make sure that your mower is on a level surface, the engine is cool, and the spark plug wire is disconnected to prevent accidental start-up.

Preparation and Drainage

The first step in changing the oil is to drain the old oil from the mower. Locate the oil pan at the bottom of the engine. It's typically a rectangular or oval-shaped metal container with bolts around its perimeter. Place your oil catch pan underneath the oil pan.

AD
How to Change the Oil in a Push Lawnmower (Example: Craftsman, Murray, Briggs & Stratton Engines)
How to Change the Oil in a Push Lawnmower (Example: Craftsman, Murray, Briggs & Stratton Engines)
a man working on a lawn mower in a garage
a man working on a lawn mower in a garage
Lawnmower Oil Change DIY
Lawnmower Oil Change DIY

Using your wrench, loosen and remove the bolts that secure the oil pan to the engine. Once the bolts are out, the oil pan should slip off easily, releasing the old oil. Allow the oil to drain completely into your catch pan. This process could take a few minutes, so be patient.

Replacing the Oil Filter

While you're waiting for the oil to drain, you can tackle replacing the oil filter. The oil filter is usually located near the oil pan and can be accessed once the oil pan is removed. Although oil filters are relatively universal, ensure you obtain the correct one that matches your mower's make and model.

How Much Oil Does A Lawn Mower Take?
How Much Oil Does A Lawn Mower Take?

Before handling the oil filter, wrap your wrench with an old rag to prevent damage. This makes gripping the filter easier and lessens the chance of Mare's tails (small, thin bits of metal that can cause damage when they come loose) breaking off and entering the engine. Counterclockwise, turn the oil filter until it's loose enough to remove by hand. Once the filter is off, use your wrench to remove any remaining bolts.

Cleanup and Installation of New Elements

With the old oil and filter removed, take a moment to clean the area around the oil pan and the oil filter mount. This helps prevent debris from entering your engine when you reinstall the new components.

AD

Starting with the oil filter, apply a thin coat of new oil around the gasket. This lubricates the seal and ensures proper installation. Screw on the new oil filter by hand, turning it clockwise until it's tight, but be cautious not to overtighten. Once the filter is in place, position the new oil pan and carefully reinstall it using the bolts you removed earlier.

Adding New Oil

Now that you've successfully drained the old oil and installed the new oil pan and filter, it's time to add the new oil. Using your funnel, slowly pour the correct amount of oil into the oil fill hole, which is usually located at the top of the engine. Be mindful not to overfill, as excess oil can cause problems with the engine or clog the crankcase breather.

After adding the oil, wait a few minutes for it to settle, then recheck the oil level using the dipstick. Wipe off the dipstick with a clean rag, then insert it back into the hole and pull it out again. The oil level should be within the "Full" or "Operating" range on the dipstick. If necessary, add or remove oil as needed.

AD

Final Touches and Safety Precautions

With the oil level adjusted, replace the dipstick and wipe any residual oil from the engine. Reconnect the spark plug wire, ensuring it's securely fastened. Check around the oil pan and oil filter for any leaks, and tighten any bolts that may have loosened during the process.

Before starting your mower, give it a quick test run in an open, well-ventilated area. This helps ensure that everything is functioning correctly and gives you a chance to check for any leaks or unusual noises. After running the engine for a few minutes, turn it off and allow the oil to settle again. Recheck the oil level one last time and make any necessary adjustments.

Changing the oil on your push mower is a simple and rewarding task that keeps your lawn equipment in optimal condition. Regularly maintaining your mower not only prolongs its life but also ensures a clean, healthy lawn all year round. Happy mowing!

AD
AD