how to change moen kitchen faucet cartridge

How to Replace a Moen Kitchen Faucet Cartridge

By Steven Rodriguez
AD

Have you been experiencing a drippy or leaky kitchen faucet? It might be time to replace the cartridge. Don't worry, it's a task you can handle yourself with the right guidance. Here's a step-by-step guide on how to change a Moen kitchen faucet cartridge.

Before you start, ensure you have the following tools and materials: pliers (preferably channel-lock or adjustable), an Allen wrench, a screwdriver, and of course, the new Moen cartridge. Always remember to turn off the water supply to your faucet at the shutoff valves under your sink to prevent any water leakage.

Preparation and Removing the Handle

The first step is to remove the faucet handle. Moen faucets usually have one or two handles, depending on whether they're single- or double-handled. Start by turning the handle slowly to align the dot on the handle with the dot on the bonnet.

AD
How to Change Moen Kitchen Faucet Cartridge
How to Change Moen Kitchen Faucet Cartridge
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove and Replace Your Kitchen Faucet
How to Remove and Replace Your Kitchen Faucet

Take your screwdriver and remove the setscrew on the underside of the handle. Then, using the pliers, gently wiggle and twist the handle to unscrew it from the stem. If you have a Moen single handle faucet, expose the hex nut on the stem by removing the cap and the decorative plug using an Allen wrench.

Accessing the Cartridge

After the handle is removed, you'll see the bonnet, which has a large hex nut underneath. Using the pliers or an adjustable wrench, hold the faucet's body to prevent it from turning while you unscrew the hex nut. Unscrew the nut counterclockwise until it's completely removed.

How To Replace A Kitchen Faucet - For Newbies! - Anika's DIY Life
How To Replace A Kitchen Faucet - For Newbies! - Anika's DIY Life
How to disassemble old Moen kitchen faucet
How to disassemble old Moen kitchen faucet

The bonnet should now be free. Unscrew it counterclockwise and lift it out. You should now see the top of the cartridge. There's usually a retaining clip or pin that keeps the cartridge in place. Remove this clip carefully using needle-nose pliers or a small screwdriver.

Removing the Old Cartridge

At this point, you should be able to see the old cartridge clearly. It might be stuck due to mineral deposits or wear. Apply a little bit of lubricant around the cartridge if needed. With the pliers, gently pull out the cartridge. If it's too tight, try turning it counterclockwise while pulling to unscrew it.

AD

Once the cartridge is out, take a look at its condition. Moen cartridges are ceramic and should have a distinct, sharp, and clean divide between the top and the bottom. If one side is worn down, it's an indication that the cartridge needs changing.

Installing the New Moen Cartridge

Before installing the new cartridge, clean the area where the new cartridge will sit with a wire brush or a stiff-bristle brush to remove any debris or old lubricant. Apply a drop of lubricant on the new cartridge.

Insert the new cartridge into the faucet body. If your faucet has a Milton or an Esculpt design, make sure to align the notches on the cartridge with the locker on the faucet body. Once the cartridge is fully seated, reinstall the retaining clip or pin to keep it securely in place.

AD

Reassembling the Faucet

Replace the bonnet by screwing it clockwise into the faucet body. Tighten it gently but securely. Next, replace the hex nut and secure it with either the cap and decorative plug (for single handle faucets) or the faucet handle (for two-handle faucets). Make sure not to overtighten.

Once the nut or the handle is secure, turn the water supply back on. Open the faucet to check if it's working properly. If you don't hear any water flowing immediately, turn the water supply off and on again to let any air out of the lines. Then, turn the faucet on again. You should now have a perfectly functional kitchen faucet with a new Moen cartridge.

Changing a Moen kitchen faucet cartridge is a straightforward task that can save you the hassle and the cost of hiring a professional plumber. By following these steps, you can restore your faucet to its original performance. So, what are you waiting for? Give it a try and enjoy your newly fixed faucet!

AD
AD