how to change inner tie rod

How to Change Inner Tie Rod: A Step-by-Step Guide

By Ashley Young
AD

Over time, suspension components in vehicles can become worn out, leading to impaired handling and control. The inner tie rod, an essential part of your vehicle's steering system, is particularly susceptible to damage. If you notice unusual vibrations, a loose steering wheel, or uneven tire wear, it might be time to replace your inner tie rod. This guide will walk you through the process of changing your inner tie rod, ensuring you feel confident and safe on the road once again.

Before we dive into the step-by-step process, let's briefly explore what an inner tie rod is and its role in your vehicle's steering system. The inner tie rod connects the steering gear (or rack) to the left and right wheels. It's responsible for transmitting the movement of your steering wheel to the wheels, allowing you to turn your vehicle precisely.

Preparation and Safety Measures

Before you begin, make sure you have the required tools and parts. You'll need a 14mm and 17mm socket, Ratchet, Breaker bar, C-clamp, large C-clamp, pry bar, vehicle jack, jack stands, lubricant, and, of course, a new inner tie rod.

AD
How to Change Tie Rods (inner and outer tie rod ends)
How to Change Tie Rods (inner and outer tie rod ends)
the text how to change ties roads how to change inner and outer tie rod ends
the text how to change ties roads how to change inner and outer tie rod ends
How To Change Inner And Outer Tie Rods
How To Change Inner And Outer Tie Rods

Safety is paramount when working on your vehicle. Make sure to park your car on a level surface and shift it into park mode, applying the parking brake for good measure. Additionally, disconnect the negative battery cable to prevent any electrical shorts.

Jacking Up Your Vehicle

Using a vehicle jack, lift your car off the ground enough to safely place jack stands under the frame. Ensure the jack stands are properly placed and secure before proceeding.

DIY How To Replace Inner And Outer Tie Rod Ends - Front End Replacement Part 2
DIY How To Replace Inner And Outer Tie Rod Ends - Front End Replacement Part 2
How to Replace Tie Rod Ends (Inner & Outer) on a 96-04 Toyota Tacoma
How to Replace Tie Rod Ends (Inner & Outer) on a 96-04 Toyota Tacoma

Once your vehicle is secure, you can safely begin working underneath it. Locate the inner tie rod end, usually positioned near the bottom of the steering gear (or rack). You should be able to see the tie rod end ball joint and the tie rod itself.

Removing the Old Inner Tie Rod

Using your 14mm and 17mm sockets, remove the castle nut and lock nut from the tie rod end, respectively. This can require some force, so don't hesitate to use a breaker bar if needed.

AD

Now that the nuts are removed, you should be able to pull the tie rod end off the tie rod. If it's stuck, you can use a pry bar to carefully pry it loose. In some cases, you might need to use a large C-clamp to squeeze the tie rod, making it easier to remove the tie rod end.

Installing the New Inner Tie Rod

The installation process is essentially the reverse of the removal process. Before installing the new tie rod end, make sure to lubricate the tie rod ball joint with a suitable grease, ensuring a smooth and long-lasting performance.

Press the new tie rod end onto the tie rod until you hear the ball joint snap into place. Then, thread on the lock nut and castle nut, tightening them by hand initially. Be careful not to overtighten at this stage.

AD

Tightening the Nuts and Adjusting the Alignment

Using your ratchet and sockets, tighten the castle nut and lock nut sequentially, alternating between the two. Proper torque specifications vary by vehicle, so consult your owner's manual for the exact figures. Once tight, use a wrench or pliers to bend the lock nut's tang into the castle nut's slot, securing the nut in place.

After tightening the nuts, it's crucial to realign your vehicle's front end. This ensures safe and precise handling after changing your inner tie rod. Consult your owner's manual for the correct procedure, which typically involves adjusting the tie rod's length and checking toe-in settings.

Reassembling and Re-checking

Lower your vehicle off the jack stands and carefully remove them. Before driving away, make sure to recheck all nuts and bolts, ensuring nothing has come loose during the process. Additionally, test your vehicle's handling on a safe, open road, gradually increasing speed to build your confidence in the new inner tie rod.

AD

Regularly inspecting and maintaining your vehicle's suspension components goes a long way in ensuring your safety on the road. By learning how to change an inner tie rod, you've not only gained a valuable skill but also extended the lifespan of your vehicle's steering system, saving you time and money in the long run.

AD