how to change hydraulic hose

Step-by-Step Guide: How to Change Hydraulic Hose

By James Davis
AD

Tackling a hydraulic hose changeover might seem like a daunting task, but with the right knowledge and tools, it's a manageable project for even the most novice DIY enthusiast. Hydraulic hoses play a pivotal role in your machinery's performance, and keeping them in optimal condition ensures smooth operation and extends the lifespan of your equipment. Here, we provide you with a comprehensive guide on how to change hydraulic hoses, packed with essential tips, step-by-step instructions, and common mishaps to avoid.

Before we dive into the nitty-gritty of changing hydraulic hoses, let's first understand why it's crucial to do so. Over time, hydraulic hoses are subjected to high pressure, vibrations, and contamination, leading to degradation and eventually failure. Regularly replacing old, worn-out hoses prevents untimely equipment failure, expensive repairs, and potential safety hazards associated with hose ruptures.

Understanding Hydraulic Hoses and Equipment Safety

Hydraulic hoses come in various sizes, designs, and materials, each catering to specific machine needs. Familiarize yourself with the different hose types, fittings, and toolkits required for a successful hose change. Moreover, prioritize safety by understanding the risks involved and implementing appropriate protective measures.

AD
How to Make a Hydraulic Hose
How to Make a Hydraulic Hose
Hydraulic Hose Routing: Best Practices To Prevent Wear, Kinks, And Leaks
Hydraulic Hose Routing: Best Practices To Prevent Wear, Kinks, And Leaks
Make a Custom Hydraulic Hose at Home — No Special Tools
Make a Custom Hydraulic Hose at Home — No Special Tools

Working with high-pressure systems demands caution. Wear safety glasses, gloves, and other protective gear to safeguard against flying debris and potential oil spray. Always ensure the machine's power source is disconnected before commencing any work.

Identifying the Right Hydraulic Hose

Selecting the appropriate hose for your machinery is crucial for optimal performance. Here's how to ensure you're getting the right one:

How To Spot a Worn Hydraulic Hose
How To Spot a Worn Hydraulic Hose
the diagram shows how to use an extension hose
the diagram shows how to use an extension hose
  • Inspect the old hose - Check the hose's working pressure, inner tube material, and braid type (woven or spiraled).
  • Consult the machine's manual - Manufacturer guidelines provide essential details about the correct hose type for your equipment.
  • Seek professional advice - If unsure, consult a hydraulic specialist to recommend the ideal hose for your machinery.

Once you've identified the correct hose, gather the necessary tools: hacksaw or hydraulic hose cutter, tubing cutter, pipe wrench, and appropriate fittings (ensure they match the old ones).

Draining the Hydraulic System

To safely change hydraulic hoses, you first need to drain the system to relieve it of high-pressure fluid. Follow these steps:

AD
  1. Locate the reservoir and drain it - Find the hydraulic system's oil reservoir, carefully unscrew the fill plug at the bottom, and allow the fluid to drain into a suitable container.
  2. Release pressure - Clamp off both ends of the hose by hand or use a hose clamp to prevent fluid leakage while you're replacing the hose. Caution: Do not forget to release this clamp after the hose changeover!

Now that you've drained the hydraulic system, it's time to remove the old hose and install the new one.

Removing and Installing Hydraulic Hoses

The removal and installation process differ slightly between hydraulic hoses with differing end fittings. Here, we'll outline the steps for the most common types: tube-end (RE) and bend-end (BE) hoses.

The fundamental steps remain similar for both hose types:

AD
  1. Cut the old hose - Using a hacksaw or a hydraulic hose cutter, carefully cut the old hose a few inches away from each end fitting. This provides enough working length to disconnect the fittings.
  2. Remove the end fittings - Unthread or unscrew the end fittings using a pipe wrench. Be cautious not to damage the fitting or braid during removal.
  3. Deburr the hose ends - Remove any sharp burrs from the cut ends with a deburring tool or file to prevent damage to the new hose during insertion.
  4. Prepare the new hose - Attach new end fittings to the new hose, ensuring they match the old ones and are correctly tightened into place. Use a hose score and deburr tool to mark the correct insertion depth for both fittings.
  5. Install the new hose - Route the hose along its original path, ensuring it's adequately supported and won't be subjected to excessive bending or kinking. Insert the ends of the new hose into the male fitting of the system, ensuring it's properly seated at the correct depth. Tighten the fittings securely using a pipe wrench.
  6. Refill and bleed the system - Locate the nearest drain point, usually the lowest point on the system. Connect a hose from the drain point to a suitable container, allowing any residual air to escape. Once air is no longer visible, refill the hydraulic reservoir with the appropriate oil type, up to the 'FULL' mark.

Special Considerations: Washdown and Suction Hoses

Washdown and suction hoses play unique roles in your machinery, demanding extra attention during replacement:

  • Washdown hoses - These carry high-pressure water and are typically found in industrial and heavy equipment. During replacement, ensure the new hose is compatible with the system's pressure and temperature requirements. Consult the machine's manual for specific guidelines.
  • Suction hoses - Found in systems with vacuums or liquid suction, these hoses must be replaced with compatible types that can withstand the system's vacuum pressure and temperature.

After completing the hose change, monitor your equipment's performance, ensuring it functions efficiently and safely. Keep an eye out for any leaks or odd noises, indicating further issues that may need addressing.

Common Mistakes to Avoid When Changing Hydraulic Hoses

Regularly changing hydraulic hoses keeps your machinery running smoothly. However, heeding these common mistakes can help you avoid unnecessary headaches and inconvenience:

AD

Inadequate Preparation

Thorough preparation, including gathering the necessary tools and familiarizing yourself with the hose replacement process, is crucial for a successful job. Inadequate preparation can lead to insufficient tools, incorrect hose selection, or incorrect fitting types, resulting in costly errors and delays.

Rushing the Job

Rushing through the hose change can lead to improper installation, incorrect torque values for fittings, and missed steps, such as hose deburring or proper routing. Take your time and follow the manufacturer's guidelines for a reliable, long-lasting hose replacement.

Inadequate Maintenance

Regular inspections and maintenance of your hydraulic hoses and fittings go a long way in preventing unexpected failures. Make it a habit to visually inspect hoses for cuts, kinks, or leaks at least monthly. Replace any damaged hoses promptly to prevent further system degradation.

Changing hydraulic hoses might seem like a complex task, but with the right preparation, tools, and knowledge, you're well-equipped to tackle it confidently. Always prioritize safety, follow the manufacturer's guidelines, and don't hesitate to consult a professional if you're unsure about any aspect of the process. Happy hose-changing!

AD