how to change hydraulic filter

Step-by-Step Guide: How to Change Your Hydraulic Filter

By Kevin Jones
AD

A hydraulic system's life blood is the hydraulic fluid, but like all fluids, it can become contaminated over time. This is where your hydraulic filter comes into play, ensuring the cleanliness of the fluid and the longevity of your system. Changing your hydraulic filter is a crucial maintenance task, and this guide will walk you through the process, from gathering your tools to flushing the system.

Before we dive into the step-by-step process, let's understand why changing your hydraulic filter is so important. Hydraulic systems operate under high pressure, and even minuscule particles of dirt or metal can cause irreversible damage. The filter protects your system from such contaminants, but over time, it too gets filled up and needs replacement.

Gathering Your Tools and Materials

Before you start, ensure you have the right tools and materials. You don't want to find yourself mid-process only to realize you're missing a crucial part. Here's what you'll need:

AD
How to Change the Hydraulic Fluid and Filter - Kubota L Series Tractor Maintenance (#90)
How to Change the Hydraulic Fluid and Filter - Kubota L Series Tractor Maintenance (#90)
IH 585 | Hydraulic Issues | Filter Change & Bleed | MCV | PRV | Flow Divider
IH 585 | Hydraulic Issues | Filter Change & Bleed | MCV | PRV | Flow Divider
Kubota B7100 B6100 Hydraulic Oil and Filter Change
Kubota B7100 B6100 Hydraulic Oil and Filter Change
  • New hydraulic filter (match the manufacturer's specifications)
  • Wrench (usually open-ended, size depends on your filter)
  • Oil catch pan
  • Rags or shop towels
  • Hydraulic fluid (match the manufacturer's specifications)
  • Filter wrench (optional, but helpful for stubborn filters)

Preparation and Safety Precautions

Safety should always be your priority. Before you begin, ensure the engine is cool to prevent any burns. Also, protect your floor from any fluid spills using your oil catch pan. Keep a rag or shop towel nearby to clean up any leaks or drips.

Ensure you have enough hydraulic fluid on hand. The type of fluid is crucial, and you should match it to the manufacturer's specifications, as using the wrong type can cause damage.

Kubota Transmission and Hydraulic Filter Replacement Video
Kubota Transmission and Hydraulic Filter Replacement Video
Kubota BX- HST Hydraulic oil + Filter Change (FINALLY!)
Kubota BX- HST Hydraulic oil + Filter Change (FINALLY!)

Draining the Hydraulic System

Locate the hydraulic filter. It's usually found on the hydraulic power unit (HPU) or the equipment it powers. Once you've found it, it's time to drain the system.

Using your wrench, slowly loosen the filter by turning it counterclockwise. If it's particularly tight, you might need to use a filter wrench. As you loosen it, fluid will start to leak out. Allow the fluid to drain completely into your oil catch pan.

AD

Removing the Old Filter

Once the fluid has drained, unscrew the filter the rest of the way by hand. You might need to use some force, but be careful not to damage the filter or the mount.

Once you've removed the filter, wipe the mount and surrounding area clean with your rag. This will help prevent debris from entering the system when you reinstall the new filter.

Installing the New Filter

Before you install the new filter, lightly coat the rubber gasket with new hydraulic fluid. This ensures a proper seal and lubricates the gasket.

AD

Screw the new filter onto the mount by hand until it's fingertip tight. Then, use your wrench to tighten it further, but be careful not to overtighten. The manufacturer should provide specific torque specifications, so follow those if available.

Refilling and Priming the Hydraulic System

Now that the new filter is in place, it's time to refill and prime the hydraulic system. Start by pouring the appropriate amount of hydraulic fluid into the reservoir.

Turn on the system and allow it to run for a few minutes. This will help pump the new fluid through the system and out the filter, priming it. Watch for any leaks around the filter, and tighten if necessary. Once you've seen fluid come out of the filter, turn off the system and allow it to sit for a few minutes.

AD

Cleaning and Final Checks

After allowing the system to sit, check the fluid level in the reservoir. Top it off if necessary, and then turn the system back on. Allow it to run for a few minutes, then shut it off and check for any leaks or unusual sounds. If everything checks out, you've successfully changed your hydraulic filter.

Remember, changing your hydraulic filter is not something you want to put off. The filter may look clean, but that doesn't mean it isn't full of tiny particles. Regular maintenance is key to keeping your hydraulic system running smoothly and efficiently. Happy wrenching!

AD