how to change fuel filters on 6.7 cummins

Cummins 6.7 Fuel Filter Replacement: Step-by-Step Guide

By Olivia Smith
AD

Regular maintenance of your 6.7 Cummins engine is crucial to ensure its longevity and performance. One of the key aspects of this maintenance is changing the fuel filter at the recommended interval. This guide will walk you through the process of how to change fuel filters on a 6.7 Cummins engine, ensuring you stay within the Cummins recommended service intervals.

Before we begin, let's briefly discuss why changing your fuel filter is important. The fuel filter, located in the fuel system, protects your engine from contaminants that can damage fuel injectors and other vital components. By replacing it at the right time, you can prevent engine issues and maintain its efficiency.

Understanding Your Cummins' Fuel Filter System

The 6.7 Cummins engine uses a primary and a secondary fuel filter in its system. The primary fuel filter is located in the fuel supply module, while the secondary fuel filter is positioned in the fuel return line.

AD
How Often to Change a 6.7 Cummins CCV Filter? 67,500-Mile Guide
How Often to Change a 6.7 Cummins CCV Filter? 67,500-Mile Guide
Cummins Fuel Filter Change (2013 - 2018 6.7L) - The Weekend Mechanic
Cummins Fuel Filter Change (2013 - 2018 6.7L) - The Weekend Mechanic
How to Change a Fuel Filter | Car Maintenance Tips
How to Change a Fuel Filter | Car Maintenance Tips

Changing both filters at once is recommended for optimal performance, although they typically don't need to be replaced at the same interval. The primary fuel filter should be changed every 15,000 miles or 6 months, while the secondary fuel filter can last up to double these intervals.

Gathering Your Tools and Parts

Before you start, gather all the necessary tools and parts to make the job smooth and efficient. You'll need:

What Happens if You Don’t Change CCV Filter 6.7 Cummins?
What Happens if You Don’t Change CCV Filter 6.7 Cummins?
Bad 6.7 Cummins CCV Filter: Signs, Risks, and Fixes
Bad 6.7 Cummins CCV Filter: Signs, Risks, and Fixes
  • New primary and secondary fuel filters (ensure they match your engine's spec)
  • 12mm and 13mm socket wrench
  • Physics' oil filter wrench
  • Rags or shop towels
  • bucket to catch any spills
  • New fuel filter O-rings (if replacing them too)

Draining Old Fuel and Removing Filters

First, make sure your engine is cool to prevent any burns. Jack up the vehicle and support it securely for better access to the fuel filters.

Using a 13mm socket wrench, disconnect the fuel supply and return lines from the primary and secondary fuel filters. Place a drain pan or bucket underneath to catch any residual fuel. Carefully loosen and remove the fuel filters, which will still contain fuel under pressure. The secondary filter may require an oil filter wrench due to its size.

AD

Installing New Fuel Filters

Before installing the new filters, inspect the mounting surfaces for any dirt or debris. Clean them thoroughly with a rag and some brake cleaner if necessary.

If you're replacing the O-rings too, install them on the new filters' spouts, ensuring they face the correct direction. Align the new primary fuel filter with the corresponding fittings and screw it into place by hand. Tighten it only with the socket wrench, at a torque of 20 ft-lbs.

Reconnecting Hoses and Final Steps

Reconnect the fuel supply and return hoses to the new filters. Ensure they're properly seated and free of any kinks. Bleed the system to remove any air by starting the engine (with glow plugs engaged) and allowing it to reach a fast idle. Listen for the fuel system prime and let it run for at least 30 seconds. Monitor for any leaks around the filter connections.

AD

Recheck the filter's torque after a few miles of driving. If everything looks good, you're done! Remember to dispose of the old filters and any used fuel responsibly, following local regulations.

Changing fuel filters on a 6.7 Cummins engine isn't particularly difficult, but it does require some knowledge of your engine's system and some basic mechanical skills. By performing this maintenance task regularly, you'll safeguard your engine's health and ensure trouble-free operation. Happy wrenching!

AD