how to change front axle on polaris ranger

Step-by-Step Guide: Change Front Axle on Polaris Ranger

By John Anderson
AD

Changing the front axle on your Polaris Ranger can significantly improve your vehicle's handling and durability, especially if you frequently traverse rough terrains. Here's a comprehensive guide to help you through this process, including crucial steps, tools required, and safety tips.

Before starting, ensure you have the right knowledge and tools. This guide assumes you have some mechanic experience and provides an overview of the process. If you're not confident, consider consulting a professional.

Understanding Your Polaris Ranger's Front Suspension

To Change the front axle, you need to understand its components and their interaction. The front suspension system consists of the front axle, CV joints, tie rods, and the steering system. The front axle transfers power from the engine to the wheels and supports the vehicle's weight.

AD
How to change a belt on a 2015 Polaris Ranger 900 XP
How to change a belt on a 2015 Polaris Ranger 900 XP
Top Parts for Your Polaris Ranger
Top Parts for Your Polaris Ranger
Polaris 4x4 Front Hub/Axle Disassembly
Polaris 4x4 Front Hub/Axle Disassembly

The CV joints, or Constant Velocity joints, allow the wheels to turn while transmitting power. Tie rods connect the steering wheel to the front wheels, enabling you to control their direction. Understanding these components will help you diagnose future issues and maintain your Ranger effectively.

Inspecting the Current Front Axle

Before changing the axle, inspect the current one. Look for excess play or noise which could indicate damaged CV joints or worn-out boot protectors. Also, check the axle's surface for signs of bending or cracking. If you notice any of these issues, replacing the front axle is necessary.

Polaris RZR Ranger FREE DIY Video's Lets Get Them Fixed And Back On The Trails..
Polaris RZR Ranger FREE DIY Video's Lets Get Them Fixed And Back On The Trails..
the front end of a vehicle with metal parts on it
the front end of a vehicle with metal parts on it

Conversely, regular wear and tear can cause excessive axle vibration, impacting ride comfort and handling. Regularly inspecting your front axle can help you prevent unforeseen breakdowns and keep your Polaris Ranger in top condition.

Safety Considerations

Before beginning, ensure your Polaris Ranger is on a stable, level surface, and the engine is off. Wear appropriate clothing, protecting your hands with gloves, and use safety glasses to shield your eyes. Keep a fire extinguisher nearby in case of emergencies.

AD

Also, be mindful of your Ranger's weight and size. Always use jack stands to support the vehicle safely once it's lifted off the ground. Never rely solely on a jack to support your Ranger while working underneath it.

Preparation and Disassembly

Gather your tools: jack, jack stands, wrenches (14mm, 17mm, and 19mm), sockets (14mm and 17mm), breaker bar, hammer, axle nut wrench (if necessary), new front axle, and thread locker (red Loctite).

Use the jack to lift the front of your Ranger, then secure it with jack stands. The rear wheels can be left on the ground for this procedure.

AD

Removing the Old Front Axle

First, remove the front wheels. Using a 17mm socket and breaker bar, loosen the lug nuts until you can turn them with your fingers. Lower the wheels to the ground. Now, remove the nuts completely.

Next, using a 19mm wrench, loosen the axle nut until it falls off. If it's too tight, use an axle nut wrench or ahammer with a bronze(update) hammer to knock it counter-clockwise. Once loosened, remove the cotter pin, then pull the axle nut and washer off the axle.

Disconnecting the Tie Rods and CV Joints

Disconnect one end of the tie rod from the steering arm. Use a 14mm wrench to loosen the tie rod end jam nut, then use a breaker bar and socket to remove the tie rod end. Repeat this process for the other tie rod.

AD

Position your jack under the differential and elevate it slightly to relieve tension on the CV joint boots. Remove the differential mounting bolts using a 14mm wrench. Then, slide the axle out of the differential and CV joint boot.

Installing the New Front Axle

Reverse the disassembly process to install the new front axle. Before final torque, apply a small amount of thread locker to the axle nut to prevent it from backing off.

Attaching the CV Joint and Reinstalling the Tie Rods

Slide the new front axle into the CV joint boot and differential, ensuring the shepherd's hook on the CV joint faces forward. Reinstall the differential mounting bolts and tighten them to the specified torque (usually around 100 to 150 lbs-ft).

Attach the tie rods to the steering arms. Once the tie rod ends are fully seated, tighten the jam nuts using your fingers. Then, use a wrench to snug the jam nuts. Tighten the adjusting nuts to the specified torque (usually around 20 to 25 lbs-ft).

Reinstalling the Wheels and Final Touches

Reinstall the front wheels, then torque the lug nuts to the specified torque (usually around 80 to 100 lb-ft). Lower your Polaris Ranger from the jack stands, remove the jack, and let the weight of the vehicle fully load the new front axle.

Drive your Polaris Ranger for a short distance to check for proper alignment and any potential issues. If everything looks good, continue enjoying your rides with your new front axle ensuring improved handling and longevity.

Regularly maintaining your Polaris Ranger, including changing the front axle when necessary, helps extend the vehicle's lifespan and keeps your adventures uninterrupted. Happy exploring!

AD