Step-by-Step: How to Change Filter on Primo Water Dispenser
If you're a Primo water dispenser owner, you might be wondering how to change the filter to maintain the fresh, great-tasting water you've come to love. Changing the filter is a straightforward process that we'll guide you through in this detailed, step-by-step guide.
Before we dive into the process, let's briefly discuss why it's crucial to change your Primo water dispenser filter regularly. The primary purpose of the filter is to remove contaminants, improve taste, and reduce scale buildup. Over time, filters lose their effectiveness and can even start introducing bacteria, making it essential to replace them every 300 gallons or every six months, whichever comes first.
Understanding Your Primo Water Dispenser Filter
First, familiarize yourself with your filter. The Primo Bottom-Loading and Bottom-Filling Water Dispensers use model 4-stage PF-3C filters, while the Top-Loading models use the 3-stage PF-2C filter. The Top-Filling and Bottom-Filling models with hot and cold options use the 4-stage PF-3C filter. For this guide, we'll focus on the 4-stage PF-3C filter, which is more common.
The 4-stage PF-3C filter reduces chlorine taste and odor, removes impurities and rust, reduces bacterial, and inhibits scale buildup. It's designed to fit perfectly into your Primo dispenser's filter housing, making installation a breeze.
Identifying the Filter Housing
Before you start, locate the filter housing on your Primo water dispenser. It's usually on the dispenser's back or side, depending on your model. The housing has a cap that twists off, and the filter is secured inside.
Once you've found the filter housing, ensure that the dispenser is turned off and unplugged to prevent any electrical hazards during the process.
Preparing for Filter Replacement
Before starting, gather the necessary materials: a pair of pliers, the new filter (make sure it's compatible with your dispenser model), and some rags or paper towels to catch any dripping water. It's also a good idea to have a shallow tray or bin to place under the filter housing to prevent water from spilling onto the floor.
priming The new filter is an essential step that helps to activate its filter media and removes any air bubbles trapped inside. To prime the filter, follow these steps:
- Remove the new filter from its packaging.
- Submerge the entire filter in a large container of the cold water and let it soak for about 15 minutes. This step helps to loosen the filter's granulated carbon.
- After soaking, swirl the filter gently in the water to remove any excess carbon. Be careful not to agitate the filter too vigorously, as this can damage the media.
Now that your filter is primed, proceed to the next section to learn how to securely install it into your water dispenser.
Installing the New Filter
With the new filter primed and ready to go, it's time to install it into your Primo water dispenser. Before you start, make sure the filter housing is completely dry to prevent any leaks or issues during installation.
If your filter housing has a cap, unscrew it by turning it counterclockwise. Some models may require you to use a flathead screwdriver to unlock the cap before twisting it off.
Removing the Old Filter
With the housing cap removed, you'll see the old filter secured inside. It's now time to remove it. Gently pull the filter out of the housing using your fingers, twisting it counterclockwise as you pull. If it's too tight, you can use a pair of pliers to grip and twist the filter carefully.
Caution: Be prepared for some water dripping from the filter and housing during this process. That's why we recommended placing a tray or bin underneath to catch any water.
Installing the New Filter
With the old filter removed, it's time to install the new one. First, ensure that the new filter is dry, as any excess water can cause leaks or prevent a secure fit. If necessary, use a clean, dry towel to wipe the filter off.
Holding the filter with the filter media pointing down, position it into the filter housing. Twist the filter clockwise while pushing it in firmly but gently. Continue twisting until the filter is securely in place and the housing is completely filled. You may feel some resistance, which is normal.
Once you've securely installed the new filter, reattach the housing cap by screwing it back on clockwise. Some models may require you to use a flathead screwdriver to lock the cap before twisting it back on.
A Word on Primo's Filter Replacement Indicator
Many Primo water dispenser models come with a filter replacement indicator light that turns on when it's time to replace the filter. If your model has this feature, it's an excellent reminder to change the filter every 300 gallons or six months.
If the indicator light is on, it's time to replace your filter. However, if you notice that the water tastes or smells differently before the indicator light turns on, it's still a good idea to change your filter as a precaution.
Resetting the Filter Replacement Indicator
After replacing your filter, it's essential to reset the filter replacement indicator light. Instructions for resetting the indicator may vary slightly depending on your model. Generally, you'll need to press and hold the "Reset" button (usually located on the dispenser's control panel) for a few seconds until the indicator light turns off.
Some models may require you to press and release the "Reset" button multiple times within a set time frame or in a specific sequence to reset the indicator. Always consult your dispenser's user manual for the most accurate instructions for your specific model.
Congratulations! You've now successfully replaced the filter in your Primo water dispenser. With proper maintenance and regular filter changes, you can expect to enjoy great-tasting, refreshing water for a long time to come. Don't forget to set a reminder to change your filter every six months, or when the indicator light turns on, whichever comes first.