how to change door code schlage

How to Change Door Code on Schlage Lock

By Sarah Hernandez
AD

Tired of misplacing your house keys, or worse, being locked out due to a forgotten code? If you've got a Schlage door code lock, the good news is changing your door code is a breeze. This guide walks you through a straightforward, step-by-step process to ensure your home stays secure with an updated code. Let's dive in, shall we?

Before we begin, gather your tools. You'll need a Schlage lock with a battery compartment (like the Encode or Sense models), your current door code, and a new four- to eight-digit code you'd like to set. Now, let's get started!

Preparation and Initial Access

Before changing your code, ensure your lock has power. Open the battery cover and replace any weak batteries. Next, enter your current door code to access the programming mode. Once inside, it's time to update your code.

AD
How to Change Programming Code On Schlage Door Lock
How to Change Programming Code On Schlage Door Lock
How to Change Programming Code On Schlage Door Lock
How to Change Programming Code On Schlage Door Lock
an electronic door lock is shown in this image
an electronic door lock is shown in this image

Remember, changing your code not only enhances security but also allows you to disable old codes given to former residents or workers. Let's keep your home as secure as possible!

Entering Programming Mode

To access the programming mode, follow these steps:

Factory Reset Procedure - Schlage Connect and Schlage Sense Deadbolt
Factory Reset Procedure - Schlage Connect and Schlage Sense Deadbolt
  1. Close and lock your door.
  2. Enter your current door code.
  3. After the lock's beep or chime, wait for five seconds.
  4. Then, enter your door code again.

Your lock should now be in programming mode, indicated by a series of beeps. It's time to change your door code!

Changing Your Door Code

Now that you're in programming mode, it's time to set your new code. Here's how:

AD
  1. Enter your new four- to eight-digit code. To delete the last digit you've entered, press the # key.
  2. After entering your new door code, you'll hear a beep. This confirms your new code; if you make a mistake, you can still delete digits.
  3. Repeat your new code within five seconds to confirm and save it.

Once your new code is set, the lock will automatically exit programming mode, and you'll hear another beep or chime. Now, it's time to test your new code!

Testing and Double-checking

Open and close your door, then try locking and unlocking it using your new code. If everything works as expected, congratulations! You've just updated your Schlage door code lock.

However, if anything goes awry, don't panic. Double-check that you entered your new code correctly. Remember, it must be between four and eight digits and can contain numbers and the # symbol. If you're still having trouble, try resetting your lock to factory settings, then reprogram it with your new code.

AD

Resetting to Factory Settings (If Necessary)

If all else fails, you can reset your lock to its factory settings. Here's how:

  1. Close and lock your door.
  2. Activate the lock's governoverride feature (usually 2121 or 0000).
  3. Press the lock button on the inside of your door, then immediately press the unlock button.
  4. Hold both buttons for at least five seconds.
  5. Your lock should now be reset to its factory settings, and you can reprogram it with your new code.

That's all there is to it! Now that your Schlage door code lock is up-to-date, you can rest easy knowing that your home is secure. Stay safe, and as always, if you have any questions or need further assistance, don't hesitate to contact Schlage's friendly customer support team. Happy securing!

AD