Schlage Door Lock Code Change: Step-by-Step Guide
Forgetting or losing your Schlage door lock code can be frustrating, but resetting your lock doesn't have to be. By following this step-by-step guide, you'll learn how to change your Schlage door lock code in no time. Let's dive in.
Before we start, make sure you have a Schlage Encode, Camelot, or Schlage Sense lock. The process might vary slightly for different models. Additionally, ensure you have access to your lock's programming area, located outside the door near the lock's interior edge.
Preparing to Change Your Schlage Door Lock Code
Before you begin, make sure you're prepared. Gather any essential tools, such as a small flathead screwdriver or a Schlage tool, if needed. Also, have your new code sequence ready, as you'll need to enter it quickly during the reset process.
Remember, your Schlage lock has two main code types: user codes and master codes. User codes provide access to invited users, while master codes have full access and control over the lock's settings. We'll cover changing both in this guide.
Accessing Your Schlage Lock's Programming Area
To access the programming area, follow these simple steps: First, press the "Schlage" button on your lock. This button is usually located near the lock's edge. Next, insert your small flathead screwdriver or Schlage tool into the hole directly below the "Schlage" button. Turn the screwdriver or tool clockwise until you feel it click into place.
Once the programming area is unlocked, you'll see two buttons: "Program" and "Exit." With these buttons exposed, you're ready to change your lock code.
Locking or Unlocking Your Schlage Lock's административный Functionality
Before changing your codes, you might need to lock or unlock the administrative functionality. To do this, press and hold the "Program" button for about five seconds. You'll feel the button release once unlocked or locked.
Now that your lock is either unlocked for changes or locked for security, let's move on to changing your user and master codes.
Changing Your Schlage Door Lock User Codes
Changing user codes is a simple process. With your lock's programming area exposed, follow these steps:
For Schlage Encode and Sense locks: Press the "Program" button, then quickly enter your new 4- to 8-digit user code. Re-pressing the "Program" button will confirm and save your new user code.
For Schlage Camelot locks: Press the "Program" button, then enter your new 4-digit user code. The lock will acknowledge your entry by beeping once. To confirm the code, press the "Program" button again.
Deleting a Schlage Lock User Code
To delete a user code, press and hold the "Program" button for about five seconds. This will delete all user codes from your lock. To avoid losing your master code, be sure to re-enter it after deleting the user codes.
If you only want to delete specific user codes, follow these steps: After holding the "Program" button for five seconds, enter the user code you wish to delete. Press the "Program" button again to confirm. Repeat this process for each user code you want to delete.
Changing Your Schlage Door Lock Master Code
Changing your master code is similar to changing user codes. The master code, however, differs based on your lock model.
For Schlage Encode and Sense locks: With the programming area exposed, press the "Program" button. Then, enter your current master code followed by a "#" symbol and your new master code. Re-pressing the "Program" button will confirm the change.
For Schlage Camelot locks: The process is slightly different. Press the "Program" button, then enter your current master code followed by the "*" symbol and your new master code. The lock will acknowledge your entry by beeping once. To confirm the change, press the "Exit" button.
Changing Your Schlage Lock's Lockout Settings
Your Schlage lock offers lockout settings to prevent repeated incorrect entry attempts. To change these settings, follow these steps:
Press and hold the "Program" button for about five seconds. Then, enter your master code followed by the "#" symbol and either "81" (lockout after six incorrect tries) or "82" (lockout after two consecutive incorrect tries). Re-pressing the "Program" button will confirm your new lockout settings.
To exit the programming area, either press the "Exit" button or wait for ten seconds. Your Schlage lock will automatically lock the programming area for security.
Congratulations! You've successfully changed your Schlage door lock code. As a reminder, keep your new code safe and secure. If you have any further questions or need additional assistance, consult the Schlage website or contact Schlage customer support.