how to change chain on stihl chainsaw

**Easy Steps: How to Change a Chain on Your Stihl Chainsaw**

By Michael Johnson
AD

Servicing your STIHL chainsaw at home can save you time and money, and learning how to change a chain on your chainsaw is a key part of routine maintenance. The chain is the cutting edge of your chainsaw and will eventually wear down and need replacing. So, let's dive into a step-by-step guide on how to change the chain on your STIHL chainsaw.

Before we start, ensure you're working in a safe, well-lit area and have the following tools and materials handy: your owner's manual, a new chain that's compatible with your chainsaw, a bar and chain oilokat, an Allen wrench (if needed), and work gloves.

Preparation and Safety

Safety should always be your top priority when working with power tools. Start by ensuring your chainsaw is unplugged and the chain has come to a complete stop.

AD
How To Change A Chainsaw Chain | Stihl Chainsaw
How To Change A Chainsaw Chain | Stihl Chainsaw
How to Change the Chain and Bar on a Stihl MS170 Chainsaw | L&S Engineers
How to Change the Chain and Bar on a Stihl MS170 Chainsaw | L&S Engineers
How to Put a Chain On A Chainsaw [Easy Way]
How to Put a Chain On A Chainsaw [Easy Way]

Before you begin, consult your owner's manual for specific details about your model. However, the general steps to change a chain on a STIHL chainsaw are largely the same across their product range.

Unscrew the Chainsaw Bar Screw

First, you'll need to loosen the chain tensioning screw located on the underside of the chainsaw's bar. Use the Allen wrench provided with your chainsaw, or an appropriately sized one from your tool kit. Leave the screw only slightly loose for now.

How to Change the Chain Sprocket on a Stihl MS170 Chainsaw | L&S Engineers
How to Change the Chain Sprocket on a Stihl MS170 Chainsaw | L&S Engineers
Secret way to start a Stihl Chainsaw? Test (MS400C) #shorts
Secret way to start a Stihl Chainsaw? Test (MS400C) #shorts

Rotate the chainBro until the drive link (the link with the top edge centered over the tie straps on the bar) is at the topmost position. This will provide the most tension on the chain when you tighten the screw.

Remove the Old Chain

With the chain periodically lifted away from the bar, use a flathead screwdriver or the tip of a pliers to lift the top sprocket or upper tie-strap keeper. This should release the tension on the chain, allowing you to slide it off the bar.

AD

Now that the chain is loose, you can remove it completely. If it's hard to remove, you might need to use a friction fit tool designed for this purpose, or carefully apply some penetrant to help loosen the chain.

Installing the New Chain

Before installing a new chain, ensure it's the correct type for your chainsaw. STIHL chains are labeled with a five or six-digit number that indicates the chain's dimensions and compatibility with your specific model.

Now, let's install the new chain. Start by aligning the drive link of the new chain with the upper tie-strap on the bar. If the drive link does not align with the tie strap, try positioning the chain on the other side of the bar and see if it fits better.

AD

Align the Chain and Tension It

Once the drive link is correctly aligned, allow the lower run of the chain to rest on the bar, with the tension side forward. Now, you'll need to lace the chain onto the bar. Start at the bottom, and work your way up. If you encounter any resistance, stop immediately and double-check that you've correctly aligned the drive link with the tie strap.

After you've maneuvered the chain onto the bar, pull the top end of the chain out to the side, and snap it into place on the bottom of the bar. Then, pull the loose end of the chain tight, and hold it in place while you tighten the chain tensioning screw.

Tension the Chain

While maintaining slight pressure on the loose end of the chain, slowly tighten the tensioning screw until you feel resistance. Then, continue to turn the screw about 1/4 to 1/2 of a turn more. This should provide enough tension for the chain to run smoothly without being too tight.

AD

Finally, test the tension by using your thumb to press down on the chain near the middle. The chain should bow slightly away from the bar. If it does not, you may need to adjust the tension.

Congratulations, you've successfully changed the chain on your STIHL chainsaw! Now, remember to lubricate your chain regularly to maintain its cutting efficiency and longevity. Always ensure you're using the right oil for your specific model. Safe cutting!

AD