how to change brake cylinder

How to Change a Brake Cylinder: Step-by-Step Guide

By Amanda Walker
AD

Brakes are the most crucial safety feature of any vehicle, so understanding how they work and how to maintain them is essential. One key component of your brake system is the brake cylinder. Located in your vehicle's brake drums, these cylinders convert the hydraulic pressure generated by your brake pedal into the force needed to stop your vehicle. If you notice a difference in your brake pedal's feel or performance, it might be time to change your brake cylinder.

Before you start, ensure you have all necessary tools, such as a jack and jack stands, oil filter wrench, brake bleeder wrench, C-clamp, and a turkey baster or syringe. Also, make sure you have the correct brake cylinder for your vehicle, as they vary by make and model. Here's a step-by-step guide on how to change a brake cylinder.

Preparation

Before you begin, make sure your vehicle is cooled off and give the brakes a moment to cool down if they've been recently used. This will help prevent any burns. Also, engage the parking brake to ensure your vehicle doesn't move during the process.

AD
Vehicle Brakes: Master Cylinder(How it works)
Vehicle Brakes: Master Cylinder(How it works)
How To Change Drum Brakes | Autoblog Wrenched
How To Change Drum Brakes | Autoblog Wrenched
rebuild brake cylinders WITHOUT EXPENSIVE tools
rebuild brake cylinders WITHOUT EXPENSIVE tools

Place jack stands under the vehicle frame near the wheel you're working on. Do not rely solely on the jack for support as it could slip. Once the vehicle is securely supported, use wheel wedges or a chock to prevent it from rolling and remove the wheel. It's also a good idea to label the components you remove to help you put everything back in the correct order.

Accessing the Brake Cylinder

The brake cylinder is located in the brake drum, behind the wheel. To access it, you'll need to remove the brake drum. This involves removing the brake shoes, which can be a little tricky but is crucial for changing the brake cylinder. First, remove the brake adjusting star wheels mounted on the back of the brake shoes.

instructions on how to change the brake rotors for a car or truck with brakes
instructions on how to change the brake rotors for a car or truck with brakes
How to Replace a Brake Master Cylinder
How to Replace a Brake Master Cylinder

Next, use a C-clamp to push the brake shoe assembly away from the wheel cylinder, then tap the center pivot pin with a hammer. Once the pivot pin is loose, you should be able to slide the brake shoes out of the way. Now, pry the brake drum off the axle using a screwdriver or a specialized tool. The brake cylinder should now be accessible.

Removing and Replacing the Brake Cylinder

Trace the brake line from the wheel cylinder to the brake pedal. You'll need to bleed the brakes, which means removing all air from the hydraulic system. Start by removing the brake line going to the cylinder using an oil filter wrench. If the line is too tight, you may need to use a bench vise. Once the line is removed, use a turkey baster or syringe to suck any air from the line and dispose of it properly.

AD

Now, remove the mounting bolts and remove the old brake cylinder. Compare your new brake cylinder to the old one to ensure they are identical. Installation is the reverse process. Once the new brake cylinder is mounted and the brake line is reattached, slowly bleed the brake system using a brake bleeder wrench.

Testing and Final Touches

Before test driving your vehicle, double-check to ensure all components are properly tightened and secured. Also, label any nuts and bolts you removed to ensure they are replaced correctly. Now, you're ready to test your brakes by driving slowly and gently applying the brake pedal. Check for any signs of leaks or air in the system.

The best way to ensure your brakes are working properly is to take your vehicle to a professional mechanic for a full brake service after you've replaced the cylinder. This will give you peace of mind and ensure your vehicle is safe to drive. Regular maintenance, including checking your brake fluid levels and replacing brake components as needed, will help keep your brakes in top condition and keep you safe on the road.

AD

Always remember, working on your vehicle's brakes should never be rushed. It's essential to take your time and make sure each step is completed correctly. After all, your brakes are responsible for your safety and the safety of those around you. So, don't hesitate to seek professional help if you're unsure about any aspect of the process. Happy wrenching!

AD