how to change battery on jeep key fob

How to Replace Battery in Jeep Key Fob

By Nicole Martin
AD

Dealing with a dead battery on your Jeep key fob? Don't let it strand you. With a simple battery replacement, you'll be back on the road in no time. Let's walk you through the process with this step-by-step guide.

First, we'll cover what you'll need, the tools required, and a simple, safe process to replace the battery in your Jeep key fob. We'll make sure you feel confident doing it yourself, saving you a trip to the dealership.

What You'll Need: Tools and Materials

Before you start, gather the following items to make the process run smoothly:

AD
How to Change the Battery in a Jeep Key Fob: Easy DIY Guide
How to Change the Battery in a Jeep Key Fob: Easy DIY Guide
2018 To 2024 Jeep Wrangler How To Change Smart Key Fob Battery With Part Number
2018 To 2024 Jeep Wrangler How To Change Smart Key Fob Battery With Part Number
2019 - 2023 Jeep Wrangler Key Fob Battery Replacement - How To Change Replace Jeep Remote Batteries
2019 - 2023 Jeep Wrangler Key Fob Battery Replacement - How To Change Replace Jeep Remote Batteries

- A new CR2032 or CR2052 lithium battery (check your owner's manual for your specific model)
- A Phillips #0 or #1 screwdriver
- A flathead screwdriver (to carefully pry open the case)
- Tweezers (to handle the battery safely)
- Magnifying glass (for better visibility)

Finding the Right Battery

Your Jeep key fob uses a small, thin lithium battery. Most Jeep models use either a CR2032 (3V) or CR2052 (3V). Check your owner's manual or look up your vehicle model online to ensure you get the correct one.

DIY JEEP - How to change SmartKey Key fob Battery on Jeep Cherokee
DIY JEEP - How to change SmartKey Key fob Battery on Jeep Cherokee
How to Change the Battery in Your Car Key Fob
How to Change the Battery in Your Car Key Fob

You can find these batteries at any hardware store or electronics retailer. Some Jeep dealerships may also stock them.

Preparing Your Workspace

Choose a well-lit, flat surface, like a kitchen table or workbench. This will give you a stable area to work and make it easier to handle the tiny key fob components.

AD

Gather all your tools and place them within reach. Having everything ready will make the process quick and efficient.

Step-by-Step Battery Replacement

Now that you have everything you need, follow these simple steps to replace the battery in your Jeep key fob:

Step 1: Remove the Key Ring

Start by taking off the key ring. This will give you better access to the case and prevent it from getting in the way while you're working.

AD

If your key fob has a button-cell battery cover, use a flathead screwdriver to gently pry it off. Be careful not to damage or bend the cover.

Step 2: Open the Key Fob Housing

Using your Phillips screwdriver, remove the two small screws securing the case together. They're usually found on the back or side of the key fob.

With the screws out, use a flathead screwdriver to carefully pry open the case. You may need to work the blade back and forth to create some space between the two halves. Be gentle – you don't want to break any tabs or cause damage.

AD

Step 3: Locate the Battery

Once open, you should see the circuit board with the old battery still attached. Before proceeding, use a magnifying glass to ensure you're looking at the correct battery. Your owner's manual should provide a diagram if you're unsure.

The battery will likely be a small, flat, circular disk with a plus (+) and minus (-) side. The plus should be facing up. If it's not, don't worry – it's just a bit stuck, and we'll free it in the next step.

Step 4: Remove the Old Battery

Use your tweezers to gently pull the battery away from the board. Be careful, as these batteries are fragile and can break if dropped.

If the battery is stuck, gently lift one edge with your tweezers and carefully slide it out. If it's still giving you trouble, try using a small amount of isopropyl alcohol on a cotton swab to clean the battery contacts. This should help release the old battery.

Step 5: Insert the New Battery

Now that the old battery is out, take your new CR2032 or CR2052 battery and insert it into the same position, making sure the plus (+) side is facing up.

If it doesn't fit, double-check that you've got the right battery and that you've inserted it correctly. Also, ensure there's no debris or residue on the contacts.

Step 6: Test the New Battery

Before closing the case, test the new battery by pressing the unlock or lock button on your key fob. If everything's working correctly, you should hear the familiar 'beep' and see the LED light up.

If not, double-check that the battery is installed correctly and that the contacts are clean. If you're still having trouble, there might be an issue with the key fob itself, and you'll need to take it to a professional.

Step 7: Reassemble the Key Fob

With the new battery tested and working, carefully place the two halves of the key fob case back together.

Using your Phillips screwdriver, reinsert and tighten the screws. Don't overtighten – you just need them snug enough to hold the case together securely.

If your key fob had a button-cell battery cover, snap it back on, and you're all set.

Syncing Your New Battery

In some cases, you may need to resync your key fob with your vehicle after replacing the battery. This is usually the case with Remote Start and Keyless Entry systems.

Step 1: Turn Off the Vehicle

Start by ensuring your vehicle is turned off and the ignition is in the 'OFF' position.

Step 2: Initiate Programming Mode

With the key in the ignition but the engine off, turn the key to the 'ON' position, then back to 'OFF'. Do this three times within 10 seconds.

If successful, you'll see the previously flashing turn signal lights illuminate and stay lit up. This indicates you're now in programming mode.

Step 3: Sync the New Battery

With the vehicle in programming mode, press and hold the Lock button on your key fob for about 10-15 seconds. You should hear a confirmation beep and see the turn signal lights flash once.

Release the Lock button and test your key fob. Try locking and unlocking the doors, and use the Remote Start feature (if applicable) to ensure everything's working correctly.

Step 4: Exit Programming Mode

To exit programming mode, simply turn the ignition to the 'ON' position and back to 'OFF' once. The turn signal lights should now return to their normal function.

And there you have it! You've successfully replaced the battery in your Jeep key fob and, if needed, resynced it with your vehicle. You're ready to hit the road with confidence, knowing you'll always have the key to your adventure.

AD