how to change a battery in a jeep grand cherokee

Step-by-Step: How to Change Battery in Jeep Grand Cherokee

By Melissa Brown
AD

The Jeep Grand Cherokee, known for its premium craftsmanship and rugged capability, relies on a healthy battery to start and power its numerous features. Over time, this battery depletes and needs replacement. Don't let a dead battery leave you stranded; follow our step-by-step guide to change your Jeep Grand Cherokee battery safely and confidently.

Before you begin, gather the necessary tools and ensure your Jeep is in a well-lit, stable, and flat location to avoid any accidents. Let's dive into the process.

Preparation and Safety Precautions

Changing your battery involves handling hazardous materials, so safety should be your top priority.

AD
Easy Steps to Change a Jeep Grand Cherokee Battery
Easy Steps to Change a Jeep Grand Cherokee Battery
How to Replace a Car Battery (Jeep Grand Cherokee)
How to Replace a Car Battery (Jeep Grand Cherokee)
How To Install a Battery in a Jeep Grand Cherokee 2011 - 2021
How To Install a Battery in a Jeep Grand Cherokee 2011 - 2021

Materials Needed: 12V battery, 10mm socket wrench, ratchet, gloves, safety glasses, and a household Cora-Diona multimeter (optional).

Safety First: Disconnecting the Battery

Start by parking your Jeep on a level surface and engage the parking brake. Turn off the ignition and remove the keys. Open the hood and locate the battery, usually on the driver's side.

a person is working on an electronic device in their hand, with other tools nearby
a person is working on an electronic device in their hand, with other tools nearby
Jeep Grand Cherokee & Dodge Durango (2011-present) - New Battery Install
Jeep Grand Cherokee & Dodge Durango (2011-present) - New Battery Install

Before touching any battery terminals, ensure all electrical components are turned off to minimize the risk of short circuits. If your multimeter is on hand, double-check that they're discharging or close to zero volts.

Preventing Electrical Short Circuits

Battery terminals can cause serious damage if short-circuited. Keep the wrench and other metal objects away from both terminals while working. Once verified, connect the negative (-) battery cable to a known good ground, like a steel part of the vehicle, to divert any potential electrical discharge.

AD

Removing the Old Battery

Now that the battery is disconnect and discharged, let's focus on removing it.

Start by removing the battery hold-down brackets using a 10mm socket wrench. You may need to remove a cable tie or plastic cover first, depending on your Jeep's model year. These brackets usually have one nut on top and one on the bottom, so use a ratchet to remove them.

Extracting the Battery

With the brackets removed, you can lift the old battery out of its tray. Some batteries may have a handle or a molded-in area to grip. If not, be careful not to bend any terminal wires while lifting.

AD

Inspect the tray for any corrosion, dirt, or debris. Cleaning it now will ensure a better fit and prevent future maintenance issues. If required, use a mixture of water and baking soda to neutralize the acid, then rinse and dry the tray.

Installing the New Battery

Before installing the new battery, ensure it's the correct type for your Jeep. The Grand Cherokee typically uses a Group 65 battery, which is 12 inches long, 7.5 inches tall, and 7.1 inches wide.

Position the new battery in the tray, matching the positive (+) and negative (-) terminals with the corresponding cable posts. Lower it gently into place, ensuring the hold-down brackets can be reattached.

AD

Securing the New Battery

With the new battery in place, secure it using the battery hold-down brackets. Hand-tighten the nuts until snug, then finish with a wrench. Make sure the battery is secure and won't move around in the tray.

Reconnect the battery cables, starting with the positive (+) cable first to prevent sparks from an electrical short. Tighten the cable connections with a wrench to ensure a solid connection.

Testing the Replacement

Before starting your Jeep, use your multimeter to check the voltage of the new battery. A fully charged, 12-volt battery should read between 12.4V - 12.8V. If the reading is below 12V, charge the battery using a suitable charger.

Now, attempt to start your Jeep. If it turns over smoothly, your new battery is installed correctly. If you experience any issues, double-check your connections and ensure the battery is fully charged.

Congratulations, you've successfully changed your Jeep Grand Cherokee's battery! By following this guide, you've not only saved time and money but also gained confidence in maintaining your vehicle. Regularly monitor your battery's health and replace it as needed to keep your adventures worry-free. Happy trails!

AD