How to Change Battery in Subaru Outback Key Fob
Having a reliable key fob for your Subaru Outback is essential for everyday use. If your key fob's battery has gone out, it's crucial to replace it promptly. Here's a step-by-step guide on how to change the battery in your Subaru Outback key fob.
Before you start, make sure you have a slimline coin battery (CR2032) ready. It's a common battery size, so you should be able to find it at any electronics store or online retailer.
Gathering Materials and Preparation
First, you'll need to gather the necessary materials. These include the new battery, a small, flathead screwdriver, and some scotch or electrical tape.
It's also a good idea to keep an extra battery on hand for future use. This way, you'll never be caught without a working key fob.
Identifying the Battery Compartment
The key fob's battery compartment is located at the back of the fob. You'll notice a small hole that indicates where to insert the screwdriver.
Subaru uses a security measure to prevent the key fob from easily being disassembled. Before proceeding, make sure your key is not in the ignition. If it is, turn the vehicle off and remove the key.
Opening the Key Fob
Insert the flathead screwdriver into the hole at the back of the key fob. Use gentle pressure and twist the screwdriver in a counterclockwise direction.
This should unlock the battery compartment. If you feel any resistance or hear clicking sounds, stop and try again. You may need to use a different screwdriver or apply more gentle pressure.
Removing the Old Battery
Once the back of the key fob is open, you'll see the old battery. It's important to dispose of this battery properly, as it contains hazardous materials.
Use your fingernail or a tweezers to gently pry the old battery out of its compartment. The battery is secured in place by a small tab, but it should come out easily with a bit of gentle coaxing.
Inserting the New Battery
Before you insert the new battery, make sure the positive (+) side of the battery is facing up. The positive side is usually marked with a "+" sign, or it may be denoted by a thicker terminal.
Insert the new battery into the compartment, ensuring the positive side is facing up. The battery should fit securely in place, with the tab on the other end holding it in.
Reassembling the Key Fob
Once the new battery is in place, you can reassemble the key fob. Align the front and back pieces of the fob, then press firmly until they click back into place.
Your key fob should now be working again. If not, double-check that the battery is inserted correctly and that there's no obstruction in the battery compartment.
Testing the Key Fob
Before you put the key fob back in your pocket or purse, test it to make sure it's working correctly.
Press the 'Lock' and 'Unlock' buttons on the key fob. You should hear the corresponding sounds from your Subaru Outback. If your vehicle doesn't respond, check the battery insertion again and try again.
Securing the Key Fob
To prevent the battery compartment from accidentally opening, put a small piece of scotch or electrical tape over the screw hole.
This will add an extra layer of security and prevent the key fob from coming apart unexpectedly.
That's it! You've successfully changed the battery in your Subaru Outback key fob. Regularly checking your key fob's battery and replacing it as needed will ensure you're never left without access to your vehicle.