how to change subaru outback headlight

"How to Change Subaru Outback Headlight: Step-by-Step Guide"

By Joseph Jones
AD

Having long, dark nights and harsh weather conditions can pose a safety hazard while driving. If your Subaru Outback's headlights are dim or faulty, it might be time to replace them. Not only will it ensure your safety and that of your passengers, but it's also crucial for maintaining visibility on the roads. Here's a step-by-step guide on how to change your Subaru Outback's headlight.

Before we delve into the process, ensure you have the necessary tools and materials. You'll need a replacement headlight assembly, ratchet and socket wrench set (10mm), Phillips head screwdriver, new headlight bulb (H7 or H8 for most models), and gloves to protect your hands from dust and grease.

Removing the Old Headlight

First, locate the headlight assembly on the front of your vehicle. The headlights are behind a plastic cover held in place by screws. Using a Phillips head screwdriver, carefully remove the screws and take off the protective cover. If the screws are stripped, you might need to try a different approach like using an impact wrench or a screw extractor.

AD
How to Change the head light bulb for Subaru Legacy and Outback. (2014 2013 2012 2011 2010)
How to Change the head light bulb for Subaru Legacy and Outback. (2014 2013 2012 2011 2010)
2010 Subaru headlight bulb replacement *UPDATED*
2010 Subaru headlight bulb replacement *UPDATED*
DIY - Black Out Headlight housing - Baking
DIY - Black Out Headlight housing - Baking

Next, you'll need to reach the back of the headlight. Pop open your hood and locate the back of the headlight assembly. There are two 10mm bolts holding the headlight in place. Use your ratchet and socket wrench set to loosen and remove these bolts.

Unplugging the Harness

Once the bolts are out, the headlight should be loose, but still connected by a wiring harness. To remove this, put on your gloves to protect your hands, then gently pull the harness away from the headlight. You should feel the connectors disconnecting.

Subaru Outback - How to Turn On/Off Headlights
Subaru Outback - How to Turn On/Off Headlights
2013 Subaru Outback headlight change
2013 Subaru Outback headlight change

Take extra care not to tug on the wires. Instead, grasp the connector itself and pull gently. If you encounter any resistance, try wiggling the connector slightly to properly align the pins. If you force it, you could cause damage to the wiring harness or the connector.

Removing the Headlight Assembly

With the wiring harness disconnected, the headlight assembly should now come out easily. Gently pull the headlight away from the vehicle's body. You might need to angle it slightly to clear the hole.

AD

If you're replacing the headlight bulb, you'll find it housed within the assembly. You can carefully remove it by pushing on the tabs on the sides of the bulb and pulling it out. Remember to note the orientation of the bulb to ensure you install the new one correctly.

Installing the New Headlight

Installing the new headlight assembly is a reverse process of removing the old one. If you're replacing the bulb as well, ensure the new one is properly seated and the tabs click into place. Align the new headlight assembly with the hole in the vehicle's body and gently push it back in.

Before reattaching the wiring harness, double-check that the headlight is aligned correctly. If it's not, you might need to adjust it using the adjustment screws located on the back of the headlight. This will help ensure your lights are properly aimed.

AD

Reattaching the Wiring Harness

To reattach the wiring harness, simply reverse the process you used to disconnect it. Align the connector with the plug on the back of the headlight assembly and push it firmly into place until you hear it click. You can test the connection by trying to pull the harness out; it should not come loose.

If the headlight does not illuminate, double-check that the connector is fully seated. You might need to wiggle it slightly to ensure all the pins are properly aligned.

Securing the Headlight Assembly

Now, replace the two 10mm bolts and tighten them using your ratchet and socket wrench set. Ensure they're tight enough to hold the headlight securely but not so tight that you strip the threads. You can refer to your Subaru Outback's owner's manual for the recommended torque specifications.

AD

Once the bolts are secure, replace the protective cover over the headlight and use your Phillips head screwdriver to reinstall the screws.

That's it! You've successfully replaced your Subaru Outback's headlight. Don't forget to test the new light by turning on your vehicle and checking all your lights, both low and high beams. If you encounter any issues, double-check all your connections to ensure they're secure and properly aligned.

Regular maintenance like this can help keep your Subaru Outback in optimal condition, ensuring your safety and that of your passengers on the road. If you're unsure about any part of the process, don't hesitate to consult a professional mechanic.

AD