how to change battery in armitron watch

Easy Steps to Change Battery in Armitron Watch

By Emily Lewis
AD

If your Armitron watch has stopped working or is losing time, the battery might be the culprit. Armitron watches, known for their style and durability, use standard silver oxide or lithium coin cell batteries that can be easily replaced at home. Here's a step-by-step guide on how to change the battery in your Armitron watch.

Before you start, gather a new battery and a small tool kit that typically includes a small screwdriver or a pry tool. The process is simple but requires a steady hand and patience. Always remember to keep your materials organized and work in a well-lit area.

Identify the Battery Type and Size

The first step is to determine the battery type and size in your Armitron watch. Most Armitron watches use one of the following battery sizes:

AD
How to change the battery on a watch with 3 techniques!
How to change the battery on a watch with 3 techniques!
How to Change a Watch Battery in Minutes?
How to Change a Watch Battery in Minutes?
How To Replace Change Watch Battery
How To Replace Change Watch Battery
  • SR626SW (Silver Oxide, 3.0V, 270mAh)
  • CR2032 (Lithium, 3.0V, 220mAh)

Check the model number of your watch and consult the owner's manual or the Armitron website for specific battery information. If you don't have the manual, you can usually find the battery type by removing the watch's case back or looking at the watch's label.

Once you know the battery type, purchase a new one, ensuring it's the same voltage and size. Always buy new batteries from a trusted source to ensure quality and safety.

How to Change a pop off back watch battery.
How to Change a pop off back watch battery.
Replacing a watch battery
Replacing a watch battery

Preparation

Before you begin, ensure your watch is clean and free of debris. Remove any dust or dirt from the case back using a soft, damp cloth. This step helps prevent any foreign particles from entering the watch when you replace the battery.

Also, work on a soft, flat surface to avoid damage to the watch or scratches on the case back. Having a well-lit workspace and good light sources, such as a desk lamp or natural light, will make the process easier.

AD

Removing the Case Back

Armitron watches use either a snap-fit case back or a screw-in case back. The method to remove the case back varies depending on the type:

  • Snap-fit case back: Use a small pry tool or the edge of a thin coin to gently pry up the case back. Start at the edge and work around the case, being careful not to damage the rubber gasket that seals the back.
  • Screw-in case back: Use a small screwdriver to carefully Unscrew the case back. Hold the watch securely with a soft cloth or third-hand tool to prevent it from moving. Once all the screws are out, gently lift off the case back.

After removing the case back, you should see the battery compartment, which might be covered by a plastic or metal clip. Carefully release the clip and remove it to access the battery.

Removing the Old Battery

Before removing the old battery, ensure the new battery is nearby and that you follow the correct polarity. Most Armitron watches have a positive (+) and negative (-) marking or symbol near the battery contact points.

AD

Using a pair of tweezers or your fingers, gently lift the old battery out of its compartment. If the battery is stuck, you can try warming the watch case slightly with your breath or a hairdryer (on low heat) to help expand the metals and release the battery.

Inserting the New Battery

With the old battery removed, take the new battery and align it with the battery compartment. Make sure the positive (+) side of the battery faces up and matches the marking on the watch. Gently place the new battery into the compartment, ensuring it lies flat and makes good contact with the metal spring or contact points.

If the new battery doesn't fit perfectly or seems too tight, Double-check that you have the correct battery type and size. If it still doesn't fit, there might be an issue with the watch or the battery, and you should contact Armitron customer service or a professional watch repair technician.

AD

Reassembling the Watch

Once the new battery is in place, carefully replace the plastic or metal clip that covers the battery compartment. Ensure the clip is properly secured and aligns with the recess in the watch case.

Next, replace the case back. For snap-fit case backs, carefully align the case back with the recess in the watch case and gently snap it back into place. For screw-in case backs, replace the screws, ensuring they are securely fastened and the case back is properly aligned.

Testing the Watch

With the new battery installed and the case back securely in place, it's time to test the watch. Gently press the crown or stem to wake up the watch and ensure it's keeping time accurately.

If your watch has additional features like chronographs, pressure sensors, or backlights, test those functions as well to ensure everything is working correctly. If the watch isn't functioning as expected, double-check that the battery is properly installed and makes good contact with the watch's circuitry.

Congratulations! You've now successfully changed the battery in your Armitron watch. With a little care and patience, you can maintain your watch's performance and ensure it serves you well for years to come. Regularly checking the battery and performing basic maintenance will help keep your Armitron watch running smoothly and accurately. Happy wearing, and enjoy your watch!

AD