how to change battery on armitron watch

Step-by-Step Guide: Changing Your Armitron Watch Battery

By Michael Brown
AD

Keeping your Armitron watch ticking accurately relies on a fresh battery. Replacing the battery at home can save you money and ensure that your watch remains in perfect working condition. Here's a comprehensive guide on how to change the battery on your Armitron watch.

Before you start, ensure you have the following tools: a flathead screwdriver, a new watch battery (usually a SR626SW or CR1616 for Armitron watches, check your watch's manual for the exact size), and a steady hand. The process involves opening the watch case, removing the old battery, and installing the new one. Let's dive into the steps.

Preparing to Replace the Battery

Your first step is to ensure your Armitron watch is ready for the battery change. Find a well-lit, cleared workspace to minimize the risk of losing any small parts.

AD
How to change the battery on a watch with 3 techniques!
How to change the battery on a watch with 3 techniques!
How to Change a Watch Battery in Minutes?
How to Change a Watch Battery in Minutes?
How To Replace Change Watch Battery
How To Replace Change Watch Battery

If your watch has a buckle, remove it. For watches with a stainless steel bracelet, you'll need to unscrew the links to detach the bracelet from the case.

Setting the Time Beforehand

Before you replace the battery, set the time on your watch. This step is crucial because when you insert the new battery, your watch will set itself to 12:00 and 00. Setting the time before ensures that you don't lose the current time when changing the battery.

Replacing a watch battery
Replacing a watch battery
How to Determine the Battery Size for Your Watch
How to Determine the Battery Size for Your Watch

To set the time, gently pull the crown (the knob on the side of the watch) out to the second position. Rotate it clockwise to set the minutes and counterclockwise to set the hours. Once set, push the crown back in.

Unscrewing the Caseback

The caseback is the portion of the watch case that secures the battery. To access the battery, you'll need to remove it. Most Armitron watches use screws to secure the caseback. Use your flathead screwdriver to carefully unscrew the caseback. If your watch has a caseback with a sapphire crystal, it might be secured with pins instead of screws. In that case, you'll need a special tool to release the caseback.

AD

Once you've unscrewed the caseback, gently lift it off from the casing. Be careful not to lose the small gasket (O-ring) that creates a watertight seal between the caseback and the watch case.

Removing the Old Battery

With the caseback off, you should see the battery compartment. Before removing the old battery, note its position and polarity. This step is essential because watches have a positive and a negative side, and installing the new battery the wrong way around can cause irreversible damage.

Use your screwdriver or a pointed tool to gently lift the old battery out of its compartment. If the battery is stuck, avoid using excessive force as it could damage the battery or the watch's internal components.

AD

Identifying the Battery Type

Armitron watches typically use Watch batteries, either SR626SW or CR1616. SR626SW is a silver-oxide battery, while CR1616 is a lithium-ion battery. Both are 1.55V, so you can use either type as a replacement. Ensure the new battery has the same dimensions as the old one to fit perfectly into the compartment.

If you're unsure about the battery type, check your watch's manual or contact Armitron's customer service for assistance.

Installing the New Battery

Before installing the new battery, ensure it's not damaged and has the correct polarity. The positive side of the battery usually has a '+' sign or a small dot, while the negative side is left blank or has a '-' sign.

AD

Position the new battery in the compartment with the positive side facing up. Gently press it into place. Just like the old battery, the new battery should sit firmly in its compartment without wobbling.

Reassembling the Watch

With the new battery installed, it's time to reassemble your watch. Before replacing the caseback, ensure that no loose parts remain inside the watch case and that the time is still set correctly.

Gently place the O-ring back onto the caseback and secure it by screwing it back onto the watch casing. If your watch uses pins instead of screws, carefully push the caseback back into place until it's securely fastened.

Reattaching the Strap or Bracelet

If you removed the watch strap or bracelet for easier access to the battery compartment, it's time to reattach it. For a metal bracelet, screw the links back onto the case. For a leather strap with pins, push the pins back into place.

If you removed a buckle, reattach it by threading the strap through the buckle and securing it with the pin.

Your Armitron watch is now ready to wear again. The final step is to test the battery by checking if your watch is working correctly. If it is, give yourself a pat on the back for a job well done! Remember, it's essential to replace your watch battery every 18-24 months to ensure optimal performance.

AD