how to change battery in adt alarm

Step-by-Step: How to Change Battery in ADT Alarm

By Joseph Allen
AD

Do you own an ADT security alarm system and find that its battery keeps running out quicker than expected? It's likely time to replace the battery. This step-by-step guide walks you through the process of changing a battery in your ADT alarm system, ensuring your home or business stays secure.

First, it's crucial to identify the type of battery your alarm system uses. Most ADT alarm systems use a 4.5V Lithium backup battery. Make sure to purchase the same type when you're ready to replace it.

Preparation

Before you begin, ensure you have the following items ready:

AD
A-1 DSC How to Change out Your System Battery
A-1 DSC How to Change out Your System Battery
How to Change your ADT Command Panel Battery if it gets low after a power outage or normal use
How to Change your ADT Command Panel Battery if it gets low after a power outage or normal use
How to Replace Battery in Door Alarm Sensor
How to Replace Battery in Door Alarm Sensor
  • A new battery (4.5V lithium)
  • A flathead screwdriver
  • The alarm system's user manual (for reference)

Power Down the System

Start by turning off your alarm system at the main panel. Typically, this involves pressing and holding the 'OFF' or 'DISARM' button until the keypad displays a 'system off' or 'system disarmed' message.

Next, confirm that the backup battery is draining by monitoring your alarm system. If it's still powered on, you might need to contact ADT customer support for assistance.

3 Ways to Turn off ADT Alarm System Without Code
3 Ways to Turn off ADT Alarm System Without Code
Change Adt Safewatch Pro 3000 Chime Battery
Change Adt Safewatch Pro 3000 Chime Battery

Locate the Battery

The backup battery is usually located inside the alarm control panel. Remove the panel's cover using a flathead screwdriver, following the manufacturer's instructions. Once the cover is off, you should see the battery located on the system's circuit board.

Carefully disconnect the battery's connectors from the circuit board. Be sure to note the positive and negative terminals before removing, to ensure proper installation of the new battery.

AD

Install the New Battery

Before handling the battery, make sure your hands are clean to avoid any contamination. Take the new battery and carefully connect the positive and negative terminals to the correct terminals on the circuit board.

Test the Battery

Once you've connected the new battery, turn your alarm system back on. The keypad should display a 'battery connected' or 'backup battery OK' message, confirming that the new battery is working correctly.

To double-check, test your alarm system by arming and disarming it. If it works as expected, your new battery is installed correctly.

AD

Reset Your Alarm Clock and Timers

When you replace the battery, your alarm clock and timers might need resetting. Consult your user manual for specific instructions on how to do this.

It's also a good idea to update your system's software at this point. Check ADT's website or contact customer support for guidance on how to do this.

Now that your new battery is installed, your ADT alarm system should be working as expected. Regularly check the battery's status on your keypad to ensure it's still connected and healthy. If you ever have any issues, don't hesitate to contact ADT's customer support for help.

AD
AD