how to change the battery on adt alarm

Step-by-Step Guide: Change ADT Alarm Battery

By Jessica Allen
AD

Nothing can be more unsettling than the screeching sound of your ADT alarm indicating a low battery. It's like having a potential intruder in your home, the sense of urgency is palpable. But worry not; changing the battery in your ADT alarm is a task you can tackle now that you've decided to take control. This guide walks you step-by-step through the process.

Before we delve into the procedure, a quick safety tip: ensure your alarm is in 'test mode' or turned off before you start. It's also wise to have your ADT user manual nearby, as models may vary slightly.

Understanding Your Alarm System

First, ensure you're familiar with your ADT alarm. Most models use a standard 4.0Ah, 12Volt rechargeable nicad battery. This battery is usually located on the main alarm panel, though the exact placement might differ between models.

AD
Battery Change Ademco Lynx Control Panel
Battery Change Ademco Lynx Control Panel
How to Unplug Adt Alarm System
How to Unplug Adt Alarm System
3 Ways to Turn off ADT Alarm System Without Code
3 Ways to Turn off ADT Alarm System Without Code

If you're unsure about your alarm model or battery type, contact ADT customer service. They can provide you with specifics and even guide you through the process over the phone.

Gathering Your Tools

To change the battery, you'll need a few simple tools:

Change Adt Safewatch Pro 3000 Chime Battery
Change Adt Safewatch Pro 3000 Chime Battery
How to Change your ADT Command Panel Battery if it gets low after a power outage or normal use
How to Change your ADT Command Panel Battery if it gets low after a power outage or normal use
  • Flathead screwdriver
  • Battery of the same type as the existing one (ensure it's fully charged)
  • Wireless radio (optional, for microphone testing)

Remember, batteries over time lose their charge and, more importantly, their ability to hold a charge. So, it's best to replace your battery every three years or so, even if it's still holding a charge.

Removing the Old Battery

Start by turning off your alarm system. Then, use your flathead screwdriver to carefully pry off the battery cover. You should see something like a 12-volt battery. Unplug the red and black wires from the battery's posts. The battery should now be free. Remove it gently.

AD

If you're replacing a battery that's been in place for a long time, it might be _stuck_ due to corrosion. In this case, seek professional help to avoid damage to your alarm system or yourself.

Installing the New Battery

Now that the old battery is out, ensure your new battery is fully charged. Then, simply plug in the red and black wires to the battery's posts. The red wire goes to the positive post, and the black to the negative.

Before replacing your battery cover, test your alarm. Follow your user manual's instructions to test your alarm system's panel, sensors, and remote control. Make sure everything's working as it should.

AD

Testing the Microphone

To test your microphone, stand about 20 feet away from your alarm panel and talk. Your voice should trigger the alarm. If not, check your microphone settings and ensure your wireless radio is transmitting on the appropriate frequency.

Remember, testing your alarm system regularly ensures it's in working condition. It also helps you familiarize yourself with the system, so you're ready in case of an emergency.

There you have it! You've successfully changed the battery in your ADT alarm. Pro tip: Make it a habit to check and replace your battery every three years to keep your home safe and secure. Always remember, peace of mind is just a simple DIY task away.

AD
AD