how to change acura rdx key battery

Boost Your Acura RDX: Step-by-Step Guide to Replacing Your Key Battery

By Rachel Moore
AD

Are you grappling with a locking system that's locked you out of your luxury SUV? You're not alone. batteries for the Acura RDX key remote can deplete, leaving you stuck. But fear not, changing the battery is an achievable DIY task. Let's delve into how to change the battery in your Acura RDX key fob, ensuring you're back on the road in no time.

Firstly, understanding your RDX key fob and its components is crucial. Your key fob is a sleek, compact gadget, packed with technology to lock, unlock, and start your RDX. Its battery is a diminutive powerhouse, ensuring these vital functions. So, let's get started!

Gathering Your Materials

Before you begin, ensure you have the necessary tools on hand. You'll need:

AD
Acura RDX Key Fob Battery Replacement (2010 - 2015)
Acura RDX Key Fob Battery Replacement (2010 - 2015)
How To Replace A 2007 - 2009 Acura RDX Key Fob Battery FCCID: N5F0602A1A
How To Replace A 2007 - 2009 Acura RDX Key Fob Battery FCCID: N5F0602A1A
Replace the battery in the 2017 - 2021 Acura key fob.
Replace the battery in the 2017 - 2021 Acura key fob.

  • New CR2032 lithium battery (this is the standard battery used in Acura RDX key fobs)
  • Phillips head screwdriver
  • Replacement tools for the snap-in fasteners (often supplied with the new battery)

Replace/ Change Acura (Flip) Key Battery Remote TSX TL RDX MDX
Replace/ Change Acura (Flip) Key Battery Remote TSX TL RDX MDX
Acura key battery replacement (no tools, no damage)
Acura key battery replacement (no tools, no damage)

Accessing the Battery Compartment

Once you have your tools ready, you're ready to dive into the nitty-gritty. The first hurdle is accessing the battery compartment.

Key Fob With Keyless Entry Remote

If your key fob is integrated with a keyless entry remote, follow these steps:

AD

  1. Look for the key release button on the side of your key fob. Press and hold this button while simultaneously sliding the key out. It might take a bit of pressure, but once you've found the right angle, the key should slide out.
  2. Now, turn the key fob over. You'll see two screws: a longer one on top and a shorter one below. Use your Phillips head screwdriver to remove both screws.
  3. With the screws removed, gently pry open the case with your fingers or use a flathead screwdriver, if needed. The key fob should now open like a clamshell.

Key Fob Without Keyless Entry Remote

If your key fob doesn't have a keyless entry remote, the process is slightly different:

AD

  1. Locate the small hole on the side of your key fob. This hole is designed for a small tool, such as a paperclip or the replacement tool that comes with your new battery. Insert the tool and press down to release the snap-in fasteners.
  2. Carefully pry open the key fob case. You might need to use a bit of leverage, but be careful not to break the case.

Replacing the Battery

With the battery compartment now accessible, it's time to replace the battery.

AD

Removing the Old Battery

  1. Before removing the old battery, determine the positive and negative sides. The positive side usually has a plus sign (+) or the word "POSITIVE". The negative side has a minus sign (-) or the word "NEGATIVE".
  2. Gently pry the old battery out using your fingernail or a small tool. Be careful not to bend the battery, as this could cause a short circuit.

Inserting the New Battery

  1. Take your new CR2032 lithium battery and ensure it's positioned correctly. The positive side should face up, matching the position of the old battery.
  2. Gently press the new battery into place. Ensure it's firmly seated, with the positive and negative sides correctly aligned.

Reassembling the Key Fob

With the new battery in place, it's time to put everything back together.

Key Fob With Keyless Entry Remote

  1. Carefully align the two halves of the key fob case. Ensure the batteries and the circuit board are properly positioned inside.
  2. Press the case together firmly, ensuring it snaps back into place. You might need to use a bit of force, but be careful not to break the case.
  3. Replace the two screws and tighten them using your Phillips head screwdriver.
  4. Finally, slide the key back into the key fob. Your RDX key remote is now ready for use.

Key Fob Without Keyless Entry Remote

  1. Align the two halves of the key fob case, ensuring the batteries and circuit board are correctly positioned.
  2. Press the case back together, snapping the snap-in fasteners into place. Again, you might need to use a bit of leverage, but be careful not to break the case.

Congratulations! You've successfully changed the battery in your Acura RDX key fob. Before you head back out on the road, test your key fob to ensure the new battery is working. If you're experiencing any issues, double-check that the battery is correctly positioned. Happy driving, and may your keys always be with you!

AD